Model | JG-FPP65/90 | JG-FPP100/120 | JG-FPP135/150 | |||
Extruder | Φ65/Φ90 | Φ100/Φ120 | Φ135/Φ150 | |||
Foam rate | times | 10-30 | 10-30 | 10-30 | ||
Width of product | mm | 640-1050 | 640-1300 | 640-1500 | ||
Cutting method | Single cutter | Double cutter | ||||
Thickness of product | mm | 1.0-2.0 | 1.0-5.0 | 2.0-6.0 | ||
Cooling method | Cooled by wind and water | |||||
Output (approx) | kg/h | 80-100 | 180-250 | 320-380 | ||
Installed capacity (approx) | KW | 120 | 220 | 300 | ||
Dimensions (L×W×H)(approx) | m | 20x7x2.8 | 23x9x3 | 25x10x3.2 | ||
Total weigh(approx) | T | 10 | 18 | 22 |
Model | JG-ZXC600/900 | JG-ZXC1100/1250 | |||
Forming width | mm | 500-700 | 1000-1200 | ||
Max. forming area | mm² | 600x900 | 1100x1250 | ||
Max. forming depth | mm | 120 | 120 | ||
Heating power | KW | 53 | 100 | ||
Production efficiency | sec./mold | 3-5 | 3-5 | ||
Air source | Mpa | 0.8-1 | 0.8-1 | ||
Install area of punching mould | mm² | 640 × 1080 | 1100×1250 | ||
Effective punching area | mm² | 620 × 900 | 1000×1250 | ||
Max. punching depth | mm | 150 | 150 | ||
Punching force | T | 50 | 80 | ||
Installed capacity (approx) | KW | 90 | 140 | ||
Dimensions (L×W×H)(approx) | m | 14x2.2x2.1 | 16x2.6x2.3 | ||
Total weight (approx) | T | 8 | 12 |