PRG-MUL2 AOC Adjustable Output Current 0-5V 0-10V PWM Timer Switch Dimmer Controller Inventronics LED Driver Programmer

PRG-MUL2 AOC Adjustable Output Current 0-5V 0-10V PWM Timer Switch Dimmer Controller Inventronics LED Driver Programmer

220Vac CC LED Driver         26-320W CC LED Driver     Potentiometer AOC CC        Dip-switch AOC CC              Waterproof CV

220V 0-10V PWM Timer        220V 110V Dimmable          7 Years Warranty IP67           300W+ High Power CC        DALI LED Driver

  10 Years Guarantee         380Vac+ High Voltage Input  UFO Round Shape CC       Internal Use CC Dimmable  Programmer SPD

Features:

• Supports DALI interface driver Programming
• Supports 0-10V Programmable Driver Programming
• Supports Other Controllers (TDD-ANPNx, SDD-AAPNx)
• Off-line programming capability
• Auto programming Mode
• Selectable tools for mass programming

Function Description:

Off-line Programming
At PC end, the upper software can download the configuration to the programmer, then only 5V power supply is needed to program the drivers or controllers.
Automatic Programming
When this function is enabled, after connecting the programming leads to the programmer, it will
download the configuration to the controller or driver.
Long Push Button(5s<T<10s), the Automatic function will be disabled or enabled.
When the function has been turned on, the Red LED will flicker 2 times, each time lasts 0.5 second. When the function has been turned off, the Green LED will flicker 2 times, each time lasts 0.5 second.
Buzzer
The programmer provides a port for connecting to an external Buzzer if needed.
When programming has finished successfully, the buzzer will beep for 0.5 seconds.

Long Push Button(T>10s), it will enable or disable the buzzer function.
When the buzzer function is enabled by above action, the buzzer will beep 2 second, or it
will beep 0.5s that means the function is disabled.
Product Series Matching Verify
Before starting the programming, the programmer will read the driver model information. If the
configuration model does not match the driver model, the upper software will show fail message, and the red LED will turn on.
The matching function is selectable at PC end. The default setting is “on”.
Notes:
1. 0~xV controller does not support matching function for it only supports one direction protocol.
2. Green LED indicates successful programming. Red LED indicates failed programming.

Model:

(For more details, please contact Chela Chen for the datasheet.)

EUG-075SxxxDV                EUG-096SxxxDV                   EUG-150SxxxDV                EUG-200SxxxDV               EUG-240SxxxDV 

EUG-075SxxxDT                 EUG-096SxxxDT                  EUG-150SxxxDT                EUG-200SxxxDT                 EUG-240SxxxDT