PP woven bag printing machine polypropylene sack making machine manufacturer based on linyi, China

Advantages

1.The motor power is only 1.5kw, lower cost 

2.PLC control, semi automatic, easy to control, good printing quality

3.The power adapts inverter control in order to reach stable operation and wide speed control range. The machine is impact, easy to adjust and operate and maintain

Using guide

1. Connect power supply, and a null wire . Make the machine run normally (notice the null wire must be fastened)

2. There is a starting-point line on each big barrel , and those lines and the forefront line of printing object are the same line when printing . According to the front line distance of printing object , word register and pattern stick in the same distance afterward the starting point.

3. Fiber sticking adopts double-face glue , with 4mm width of word register.

4. Add ink into the ink hooper according to the color needed . When printing , use rubber roll to press gently the roller . (Notice : If the pressure is too heavy , rubber roll and roller will be damaged ).

5. If the transmission belt runs abnormally , you can adjust rear tranmission pipe.

Main Technical Parameters