POE IP over Coax Extender (Ethernet over Coax, incl. transmitter and receiver)
Overview
The LNK-DEC110 Series DIN-Rail Ethernet over Coaxial Converter is a new designed Ethernet Extender Device. This Device is designed to extend Ethernet Network signal and Power over existing coaxial cable, and able to live transmit multi-channel Power + Network date signal, the Max distance is up to 1200M(Power: 300M). 2pc BNC design supports to connect 2 channel branch lines at same time. The total power of electricity is 100W, each BNC max is 50W. Network max baud-rate is up to 100Mbps.
Features
· Transmit 10/100 Mbps Full Duplex Ethernet up to 1200m (without PoE) or 300m (with PoE)
· Transmission Media: Coaxial Cable(Best), 586B, CAT5e/6
· Input Voltage: DC18V~48V (POE: DC48V).
· Support Power over Coax & Power over Ethernet at same time.
· 2pc BNC design, support to connect Max. 7 channels branch line
· Operation: Use the existing network, easy to install, Plug & Play. Convenient and efficient.
· Code Standard: abide by IEEE802.3 10/100 base-TX Ethernet standard protocol
· Advanced 128-bit AES encrypted transmission and PoE+ power technology
· Excellent Protection: Built-in transient protection; industrial temperature range. Excellent lightning protection and strongly Anti-interference, surge protection.
Application
I. Provide PoE Power Supply for front-end PoE device (Transmission Distance: 300m)
II. Without PoE (Transmission Distance: 1200m)
IV. Daisy-chain Connection without PoE
IV. Daisy-chain Connection without PoE
Technical Indexes
Ethernet |
|
Standards |
IEEE802.3 10Base-T |
IEEE802.3u 100Base-TX |
|
IEEE802.3af Power Over Ethernet |
|
IEEE802.3at Power Over Ethernet |
|
Cabling |
10Base-T: Cat 3,4,5, or above |
|
100Base-TX: Cat5 or above |
Maximum Distance |
Cat5UTP up to 100m |
Connector |
1 x RJ45 |
Coaxial |
|
Cabling |
Coaxial Cable (75 ohm) |
Connector |
1 BNC (female) |
Distance |
Up to 1200m (no PoE), 300m (with PoE) |
Data Rate |
|
Downlink (TX to RX) |
90Mbps (Max.) |
Uplink (RX to TX) |
90Mbps (Max.) |
Technology |
Power Line Communication (PLC) |
Protection |
|
Reverse Polarity |
Present |
Electrical and Mechanical |
|
Input Power |
DC18V~48V (PoE: DC48V) |
Power Consumption |
8W Max. (PoC not in use) |
60W Max. (Poc in use) |
|
LED Indicators |
|
Power (Power) |
RED (Power On: keep lighting; Power Off: lighting off) |
Coax (Cable Link) |
GREEN (Flicker: signal transmission) |
Ethernet |
SPD, LINK/ACT, PoE(Transmitter) |
PoE |
|
Standard |
IEEE802.3af/at |
Mode |
B Mode |
Port |
RJ45 |
Max. Power Per Port |
25.5W max.at RX(Powered Device) |
30W Max.at TX(Power Souring Equipment) |
|
Mode |
Positive(VCC+): RJ45 Pin 4,5 |
Negative(VCC-):RJ45 Pin 7,8 |
|
Dimensions (W x D x H) |
95 × 67 × 30 mm |
Weight |
0.5kg |
Casing |
Aluminum case |
Environmental |
|
Operation Temperature |
-10C to 60 C (10F to 140F) |
Storage Temperature |
-40C to 85C (-40F to 185F) |
Relative Humidity |
5% to 90% non-condensing |
MTBF |
> 100,000 hrs |
Regulatory Approvals |
ISO9001 FCC Part 15 Class A EN55022 Class A Surge Protection RJ45: 1KV BNC: 2KV Power: 500V |
Contact Person:Shirley Zhang
Email: sales003(at)e-linkchina.com
Tel: +86 755 83128674
WhatsApp: +86 18682101350
Skype: elinkchina003
Wechat: elinkchina003