PLC industrial control servo driver lithium battery ER17330V/3.6V MR-BAT
Model: mr-bat / A6BAT are available in stock
Shelf life: more than 10 years of static discharge
Origin: Japan, Indonesia
Voltage: 3.6V
Capacity: 1700mAH
PLC lithium battery
It is suitable for data storage of CNC machine tools and automation equipment
Product advantages: high voltage, high energy density, long life, stable discharge, high current discharge performance, wide temperature range (- 40 ~ + 85 ℃), no leakage, good durability
Application scope: real time clock, alarm system, PLC backup memory power supply, FANUC CNC system, servo motor, machine tool equipment, various measuring instruments, special electronic equipment, etc
matters needing attention:
1. This battery is not rechargeable, if you want to detect the quality of the battery, you can only measure the voltage, not the short-circuit current. Because measuring the current of the battery is to discharge the battery. Will shorten the service life of the battery, serious will cause damage to the battery.
2. Be sure to check the positive and negative poles of the original battery before installation.
Because this battery is a disposable lithium battery, it will not be returned or replaced after installation!
Safety in use
warning
(1) It is forbidden to directly short circuit the positive and negative poles of the battery: short circuit the battery will make the battery hot or cause explosion.
(2) It is strictly forbidden to throw the battery into the fire. When the battery is heated to above 85 ℃, it will cause leakage, fire or explosion.
(3) It is strictly forbidden to weld the battery directly for too long. Long time welding of battery shell will lead to battery explosion or liquid leakage.
(4) Charging is strictly prohibited. Charging may cause internal short circuit, which may cause fire or explosion.
(5) Forced discharge is strictly prohibited: forced discharge of batteries connected in series will cause battery heating, leakage or explosion.
(6) It is strictly forbidden to connect batteries in series and parallel by yourself. If batteries are connected in parallel by themselves, liquid leakage, fire or explosion may occur
Blow it up.
(7) It is strictly forbidden to invert the positive and negative poles: incorrect connection will lead to short circuit of battery, charging or forced charging, which will lead to battery failure
Heat and explosion.
(8) No swallowing: keep the battery away from children. If swallowed by mistake, go to the hospital immediately.
(9) It is strictly forbidden to discard at will: please dispose according to the relevant local or national regulations.
be careful
1. Do not short circuit, disassemble or place the battery in high temperature environment to avoid danger;
2. Do not charge batteries of different brands in the same charger at the same time;
3. Do not mix rechargeable battery with dry battery (carbon battery, alkaline battery, etc.);
4. Do not mix Ni MH and Ni Cd batteries of different capacities and models;
5. Do not use batteries that have been deformed, leaked or short circuited to avoid danger;
6. When installing the battery, please put it in according to the positive and negative pole marked on the appliance;
7. When not in use for a long time, please take out the battery and store it in a dry and cool place;
8. Overcharge and over discharge of rechargeable battery will directly damage the battery, and lithium battery may explode when it is serious;
9. The chargers of lithium battery, Ni MH battery / Ni Cd battery and storage battery should not be mixed to avoid damaging the battery;
10. Do not put the battery in the place easy to be touched by children to avoid danger;
11. Pay attention to environmental protection, please put the used batteries into the recycling box.