PFA tubing
Use:
- LCD manufacturing equipment
- Single fiber light-emitting whole body single-ended tube
- Heat exchangers, steam piping
- High-purity reagents Pipeline
- A variety of corrosive media (harsh solvents) pipeline
- Submersible motor with a slot insulation tube
- Air-conditioning control wiring harness assembly,
- All-inclusive fluoride O-ring plastic tube
Utilization Characteristics:
- High and low temperature
- -200 ~ 200 °C high temperature
- Not sticky, water fight, fight oil
- Electricity reliability, high insulation
- 60HZ-60MHZ both high and low temperature dielectric constant 2.1.
- Even if the surface due to flash over and the damage it does not produce conductive tracks.
- Volume resistance> 1018Ωm
- Surface resistance> 2 X 1013Ω
- Arc> 165 seconds without leakage
- Corrosion resistance
- Only high temperature element fluorine, alkali metals and it works on all the other thick, dilute inorganic acids, alkalis, esters had no effect.
- Low water absorption
- Low suction rate of <0.01%
- Incombustibility
- The air will not burn. (Oxygen index> 95vol.%)
- With physical inertia
- Transparency
- Optical refractive index in the lowest of all plastics
- Weatherability
- Can be prolonged exposure to ozone, the sun
- Easy processing of secondary
- Can be self-appointed, self-welding can be flange, it can be set to control