PE100 black hdpe poly ethylene pipes sdr 26

Introduction:

HDPE pipe (High-density polyethylene pipe) is made from high density polyethylene as the main raw material, adding a small amount of antioxidants, Anti-UV absorbers and pigments.

Features: 

1.Material: high quality PE 100

2.Diameter Nominal : 16mm to 1400mm

3 Pressure:0.6-1.6Mpa 

4.Connection: socket fusion, butt fusion joint, electro fusion joint, flanged joint

5.Applications: Water supply, industrial liquids transportation and sewage treatment  

 Properties:

1.Specific Gravity, g/cm3, 20(C): 0.941-0.965

2.Longitudinal Reversion, % (110(C)): <=3

3.Oxidation Induciton Time, min (200(C)): >=20

4.Extension Rate at Break. %: >=350

5.Hydraulic Pressure Test: 

  1)20(C), Hoop Stress is 12.4 Mpa, 100h: No Failure.

  2)80(C), Hoop Stress is 5.5Mpa, 165h: No Failure.

  3)80(C), Hoop Stress is 5.0Mpa, 1000h: No Failure.

Specification:

Connection:

Advantages: 

1)  The flexibility of PE pipe allows cost savings in installation.

2)  PE is often used in renovation of old pipelines as it can be readily inserted as a structural lining into an old pipeline. 

3)  PE’s resistance to ground instability means that PE gas and water systems were the only systems to survive the major earthquakes.

4) PE pipe can be supplied in straight lengths or in coils, reducing the need for joints and fittings. 

5) PE pipes can be jointed using butt and electrofusion techniques or using mechanical fittings.

Applications: 

1.Municipal water supply

2.Commercial & Residential water supply

3.Industrial liquids transportation

4.Sewage treatment.

Inspection: 

All kinds of products are regularly conducted pressure-tight blastingtest,longitudinal shrinkage rate test, quick stress crack resistance test, tensile test and melt index test, so as to ensure the quality of products totally reach the relevant standards from raw materials to finished products.

Remarks:

Our main products includes: