PA-26 1p2w, 3p3w, 3p4w 3 phase Power Transducer Active 5A/100V 4-20mA output Signal Isolated Power Transmitter
Description
<1>. PA-26 active power transducer can respectively sample,isolate and amplify the voltage and current of the measured electricity, through high precision division multiplier operation, converts them into dc signal which has a proportional linearity with the input signal.
<2>. PA-26 power transducer can reflect the transmission direction of the measured power in the system.
<3>. TPA-26 power transmitter is suitable for single phase with frequency of 50Hz or 60Hz and three phase (balance or unbalanced) lines.
<4>. This power transducer can be widely used in power and non power systems with high power measurement.
<5>. This power transmitter can run continuously for a long time and realize the measurement and control of the systematic power.
Product Features
Technical Parameters
Input | Input current range | AC 0-5A |
Input voltage range | AC 0-500V | |
Frequency range | 40Hz-60Hz | |
Output | Output signal | 4-20mA;0-20mA;0-5V;0-10V etc |
Output load resistance | RL≤500Ω(output current signal) RL≥10KΩ(output voltage signal) | |
Parameters | Power supply | AC 85-265V |
Rated power consumption | ≤4W(AC220V power supply,output 20mA) | |
Accuracy | ≤0.5% F.S. | |
Response time | ≤400mS(0-90%) (TYP) | |
Temperature drift | 0.02%F.S./℃ (-20℃~+55℃) | |
Isolation intensity | 2000V AC/1min(between input-ouput-power) | |
Insulation resistance | ≥100MΩ(between input-ouput-power) | |
Working temperature&humidity | -20℃~+55℃ | |
EMC | Complies with GB/T 18268.1(IEC61326-1) |
Selection of PA-26 Power Transducer
Dimension of PA-26 Power Transducer
Wiring Diagram of PA-26 Power Transducer
Application Industry
Certificates
Shipping&Payment