Technical specifications: | |||
---|---|---|---|
Output red | 1000mw/638nm | ||
Output green | 1000mw/520nm | ||
Output blue | 2000mw/445nm | ||
Scanner | 40K | ||
Laser class | 3B | ||
Operation modes | auto mode, music mode, DMX512, ILDA | ||
Basic patterns: | 128 | ||
Beam specifications: | Color | Disvergence | |
Red:638nm | <1.2mrad,4*2mm | ||
Green:520nm | <1.2mrad,4*2mm | ||
Blue:445nm | <1,2mrad,4*2mm | ||
Laser safety: | Laser safety according to EN 60825: Key switch, Interlock interface. Overload protection on X and Y Galvo for best safeguarding against failure. Mechanical shutter optionally available. | ||
Accessories: | power cable, manual, interlock adapter, key switch; | ||
Power supply: | 110-120V/220-240V switchable AC 50/60Hz | ||
Power consumption: | 300W | ||
Net weight | 8KG | ||
Gross weight | 9KG with carton package, 14KG with flight case | ||
Dimenstion | 28*21*17cm |
TO SAVE YOUR COST
To start with the right supplier will save much of you cost. Cost consists of not only money, but also time, possible headache of technical support and after-sale service.
What should you think about to select right suppliers? Let Jeff @GolderStar tell you some industry info below.
Laser Module Production
In China most stage laser manufacturers do not make laser module (light source, heart of the laser), we make laser module and also sell to customers who build the lasers worldwide.
Our laser module workshop ensure not only the good price of our laser show system, but also the advanced technology and efficient after-sale service.
Furthermore, we make all the PCB in our factory.
Hardware Production
Besides the laser module, most stage laser manufacturers do not make hardware either (for example they buy the generic housing). However we make all the hardware (metal parts) of the laser system inside out, including the housing, plate, mount etc..
You will find our hardware is of better material and thicker and better finish than the generic ones which you buy from other suppliers (their generic housing even without heat sink).
With 10 CNC machines in our workshop we can also custom-make your exclusive housing easily.
Join Us
Our 4500m2 factory (2 buildings with approx. 80 staffs) is 20 minutes' drive from Guangzhou airport, your visit is very welcome.
Working deeply in the laser industry for 13 years (since 2008), we still strive for growth and working with you for future fortune.
Why not contact us now to start ?
Jeff is on standby for your contact
( Photo 2019, now approx. 80 staffs in 2021 )
( Reception )
( Yard between 2 buildings )