Ozone gas analyzer design to measure ozone concentration or ozone output

The model UV-2000S designed based on the Lambert - Beer law to measure ozone concentration (MG/L) or ozone output (Grams/hour) out of the ozone generator outlet; (Lambert - Beer law: By measuring the intensity changes of the UV light signal before and after the ozone absorption);

Model UV-2000S adopt the advanced double beam UV light source system; It include the lamp intelligent management system can make the ultraviolet lamp tube reach the working environment in the short time. Which combine the separate style light pool technology in it.

Instrument will carry on zero calibrating and blowing every one hour, to ensure continous stability of the zero function, and working 24 hours per day with high efficiency;

Model UV-2000S has many features. Such as: No Ozone leakage, friendly to high pressure ozone gas, easy to clean, easy maintenance, simple operation, low running cost, and etc.

Operation Method:

This tester boots that enter the working state. Recommended preheat 30 minutes after use.

When in use, please first ensure the electrical, pipeline is connected correctly, especially the ozone input port and the output port can not be reversed, the flow control in 1.0L/min. Note that the input and output of ozone, it is strictly prohibited to input and output ports connected in reverse.

The detector boot first auto zero calibration, uses the air pump to blow sweep air as zero, auto zero calibration interval by the boot time of 2 minutes gradually extended, 30 minutes after the error more than one hundredth of a school zero. Users can also according to the needs of communication by sending commands or keys to achieve zero.