Overhead pressed HDG steel panel water storage tanks with stand

 The hot dipped galvanized steel water tank defers to the GB code 92SS177 manufactured new 

type water tank. The manufacture and the installment of tank have no influence of  the construction. There are not needed the welding apparatus, the surface is hot dipped galvanize antiseptic treatment. It's artistic durable, prevents two times pollution to water quality and it beneficial to human health. The water tank meets the construction product standardization, the serration and the factorization request. 

1. Material 

The sectional panel tank shall consist of 4' x 4',1mx 1m,1mx 0.5m, 

panel manufactured from 1.5mm to 4.0mm thickness according to requirement.

2. Flanges 

The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree 

to the face of the plate on four sides.

3. Reinforcement Method 

All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The top panel is supported by top panel support, which shall be made of stainless steel  grade 304 or 316 material according to requirement.

4. Accessories

     1. Bolt. nut & washers stainless steel 304 material.

     2. Sealing material Non-toxic P.V.C foam tape shall be used in between the joints.

     3. Covers the tank cover shall be constructed from 1.2mm to 3.0mm of thickness stainless steel 

        304 material according to the requirement.

     4.Ladders and Level Indicator  Internal & external ladder shall be made of stainless steel grade 

      304 material.   

1.  Excellent UV and weather-resistant characteristics; corrosion resistant; anti-rusted.

2.  High strength and Durability.

3.  No-leakage.

4.  Excellent hygienic, good water quality: non-toxic and corrosion from panels and

     prevent bacteria increasing.

5.  High seismic tolerances; Does not deform or dent.

6.  Low thermal conductivity and excellent thermal insulation.

7.  Easy to clean and maintenance management convenient.

Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align galvanized steel panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank. 
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test. 

• Potable Water Storage Tanks
• Rain Water Harvesting Tanks, Well Water Tanks, Sea Water Tanks
• Reverse-Osmosis Water Tanks (water with high or low conductivity)
• Fire Reserve Storage Tanks, Swimming Pool Balance Tanks
• Distillation and Process Tanks
• Septic Tanks and Sewage Tanks
• Industrial Process Tanks, Chiller Water Tanks, Cooling Tower Water Tanks
• Hot Water Storage Tanks
• Agricultural Irrigation Tanks 

Hebei Long Zhuo Trade Co., Ltd. was established in 2013 and is located in Hebei Province, the north of China. For the past few years, we have devoted ourselves to provide high quality products to the oversea markets.

Our products mainly include Water Treatment Media (such as Tube Settler, MBBR Media, Bio Ball Media, Diffusion Aerator etc.) and Water Tank (such as GRP Water Tank, Galvanized Steel Water Tank, Stainless Steel Water Tank). All of the products support OEM.

Ethics to a business is what morality to a man. It is our eternal pursuit to stick to the principle of "integrity and quality first, strenuously developing highly advanced and sophisticated technology". We hope to achieve common development on the basis of reciprocity and mutual benefit, and make a good brand with good faith. With new corporate image and superior product quality, we strive to create a brilliant future.