Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
wireless signal transmitter repeater for gsm1800mhz mobile signal enhance Function:
1,Donor Unit,Remote Unit;
2,In-band and out-band can be customized;
3,The Remote unit can be used out of the BTS coverage;
4,Highly selective channel selector can process 1 or 2 or 4 or 4 or 8 channels simultaneously
5,Easy to install on wall or pole
Applications:
To expand signal coverage of signal blind areas where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
Technical Specification:
Items |
DCS Frequency Shifting Repeater |
||||
Donor Unit |
Remote Unit |
||||
Frequency Range |
Uplink |
1710-1785MHz |
|||
Downlink |
1805-1880MHz |
||||
Transmission Frequency |
Various frequency(Upto15GHz)is available upon request |
||||
Transmission Distance |
Max20KM(From Donor Unit to Remote Unit) |
||||
Frequency Error |
Max0.05ppm |
||||
Downlink Input Level |
Wireless Access Type |
Min-70dBm |
|||
Direct Couple Type |
Min-10dBm |
||||
Output Power |
Master |
Wireless Access Type |
Min30dBm-40 dBm(1-10W) |
Min30dBm-37dBm(1-5W) |
|
Direct Couple Type |
Min0dBm |
Min30dBm-37dBm(1-5W) |
|||
Slave |
Min30dBm-37dBm(1W-5W) |
Min37dBm-43dBm (5W-20W) |
|||
Working Bandwidth |
Various bandwidth is available upon request |
||||
Gain |
Master |
Wireless Access Type |
Min.85dB |
Min:85dB |
|
Direct Couple Type |
Min.45dB |
Min:45dB |
|||
Slave |
Min.90dB |
Min:90dB |
|||
AGC Control Range |
Min30dB(+/-2dB) |
||||
Gain Control Range |
31dB(1dBStep) |
||||
VSWR |
<1.5 |
||||
Ripple in Band |
Max-1.5dB |
||||
Inter modulation attenuation |
≤-45dBc ♦; ≤-36dBc ♦ |
||||
Spurious Emissions |
9KHz-1GHz |
Max -36dBm |
|||
1GHz-12.75GHz |
Max-30dBm |
||||
I/O Impedance |
50ohm |
||||
Noise Figure |
Max5dB |
||||
Group Time Delay |
Max5µS |
||||
Temperature Range |
-25degreeCelsiusto+55degreeCelsius |
||||
Power Supply |
DC -48V / AC220V (50Hz)/AC110V(60Hz)(+/-15%) |
||||
NMS Monitor Function |
Real-time alarm for Door Status, Temperature ,Power Supply, VSWR, Output Power, Gain, Uplink ATT, Downlink ATT and etc. |
||||
Remote Control Module(Optional) |
RS232+WirelessModem+Li-ion Chargeable Battery |
GSM Wireless transmitter and receiver GSM 900
Photos of repeater :
Outdoor Cellular 95dB GSM LTE 4G DCS 1800 MHz Mobile Cell Phone Signal Booster Repeater Amplifier
Outdoor Cellular 95dB GSM LTE 4G DCS 1800 MHz Mobile Cell Phone Signal Booster Repeater Amplifier
Outdoor Cellular 95dB GSM LTE 4G DCS 1800 MHz Mobile Cell Phone Signal Booster Repeater Amplifier
Outdoor Cellular 95dB GSM LTE 4G DCS 1800 MHz Mobile Cell Phone Signal Booster Repeater Amplifier
Outdoor Cellular 95dB GSM LTE 4G DCS 1800 MHz Mobile Cell Phone Signal Booster Repeater Amplifier
Frequency range list for our repeaters :
Support System |
Frequency Range |
Output Power |
GSM900MHZ |
890-915MHz/935-960MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz |
1710-1785MHz/1805-1880MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz |
1895-1910MHz/1975-1990MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz |
824-849MHz/869-894MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz |
450-457.5MHz/460-467.5MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz |
824-849MHz/869-894MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz |
1880-1890MHz/1960-1970MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz |
824-849MHz/869-894MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz |
1920-1980MHz/2110-2170MHz |
2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ |
890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz |
2W/5W/10W/20W/ |
GSM850/1900MHZ |
824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz |
2W/5W/10W/20W |
GSM900/UMTS2100 |
890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz |
2W/5W/10W/20W/ |
Our repeater support above frequency range .
Our present manufacturing service:
1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA
2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS;
3. Tri-band repeater of GSM/DCS/WCDMA
4,Trunk Amplifier
5. All kind of Antenna/Splitter/Connector/Cable
Question: I work in an office building where my cell phone coverage in certain areas, including my office, is non-existent or spotty at best. How can I improve my coverage?
Answer: The requirement for reliable, always-on cell phone coverage within the office environment is increasing dramatically. It is not unusual to encounter trouble spots within a building where cell phone signals are weak or non-existent.
Kingtone repeater provides affordable and clear coverage to those trouble spots. The unit can be easily deployed and provides a coverage range of up to 100,000 square feet. Multiple units can be easily deployed to cover office areas and working locations.
Kingtone repeater can be deployed even without access to the roof or outside.
Repeater Testing :
At Present, Kingtone exhibited the highest quality products and enterprise’s comprehensive strength. And Kingtone continues to strengthen technological innovation on repeater products and will launch the new products on the market soon.
With your supports and new requirements which can make us improve our service, innovative our technology and consummate the products.
OEM & ODM are welcome!
Kingtone RepeaterApplications:
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than-70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.
A: In general, it is 100pcs. According situation, it is negotiable.you can also place sample order.
2. Q: do you accept Customized?
A: yes,we did produce as customer requirement ,OEM & ODM are welcomed.MOQ of customized order should be 1000pcs
3. Q: Could you offer free sample to test?
A: Yes, sure. For regular VIP agency we offer free sample when New Products Launch,for New customer you pay the sample fee first when your Order reach required amount we minus the sample Cost for you.
4. Q: What payment terms you can accept ?
A: We support TT /Western Union /Paypal
Welcome to our website : www.kingtone.cc www.cnkingtone.com for more updated information .
Harleen Zhang
skype:Harleen Cheung
Whatsapp:+86 189 5990 7522
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd
Add:3th Floor,Bld B,Yucheng Base, Keji Road,Fengze district ,Quanzhou ,Fujian,China.
Web: www.cnkingtone.com ; www.kingtone.cc
For more information
pls kindly visit our website :www.kingtone.net.cc; www.cnkingtone.com