Xiaomi 300M Amplifier Pro WiFi Repeater Network Expander Power Extender Roteador 2 Antenna for Mi Router Wi-Fi Amplificador APP

Specifications: Material: PC/ABS ROM: 2MB Nor Flash Memory: Built-in 8 MB DDR1 hardware configuration 2. 4G Wifi: 2*2 (Maximum speed 300 Mbps) Antenna: Two external omnidirectional high gain antennas (2.4 GHz maximum gain 3dBi) Whole machine interface: A Red/Blue/Yellow Tricolor LED Indicator One system restore factory setting button Cooling: Natural cooling Protocol standard: IEEE 802.11b/g/n Certification standard: GB9254-2008/ YDT993-1998/ GB4943.1-2011 Wireless parameters: 2.4 GHZ Wireless channel: 2.4 GHZ Channel 1,2,3,4,5,6,78,9,10,11,12,13 Modulation: 11b: DSSS: DBPSK (1mbps), DQPSK (2mbps), CCK (5.5/11mbp) 11g: OFDM: BPSK (6/9mbps), QPSK (12/18Mbps), 16QAM (24/36Mbps), 64QAM (48/54Mbps) 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM. Rate Set: MCSO-MCS15 Receive sensitivity: 11MDps: ≤-90Bm, 54Mbps: ≤-72dBm, HI20MCS7: ≤-69dBm, HI40 MCS7: ≤-66dBM. Descriptions: Easy WiFi signal expansion, three-step adaptation of mainstream routers. Home load-bearing walls, bedroom doors, glass and so on will lead to Fi signal reduction when you need to match the millet WFi amplifier Pro. Place the amplifier near the router and wait for the yellow light to flicker. Scan the two-dimensional code and install APP. Add the amplifier according to the instructions. When the indicator turns blue, the amplifier can be moved to the bedroom where the network needs to be expanded.