Manufacturer | Xiaomi |
Type | System for filtering water |
Model | Mi Water Purifier 2 |
Dimensions | |
Weight | 11.8kg |
Rated total net amount of water | 1200L |
Water flow | 1.0L / min |
Apply pressure | 0.1-0.4MPa |
Water temperature | 5-38 ℃ |
Rated voltage | 220V |
Rated power | 96W |
Rated frequency | 5 |
Amount of filters | 4 |
Filter filled with wool | Clears larger particles, rust, algae, sand, etc. |
The filter of activated carbon granules | Clears from chlorine, various additives, destroys odors and other chemicals. |
Filter Biological Protection | Clears water from antibiotics, bacteria, heavy metals, microorganisms. |
Filters from carbon granules | Final purification of water from the remaining fine particles. |
Efficiency | 100 % |
Managing your smartphone | With the application, the tools included in the firmware MIUI. |
An apparatus for monitoring water quality | Mi TDS Pen (not included, sold separately) |
Saving space
With its compact shape and sophisticated design the Mi Water Purifier 2 can be placed in any place convenient for your use. You will save a lot of space by setting the water purifier under the sink or in the kitchen cupboard. You will be able to install a separate tap for clean water without overloading the general kitchen design.
400 gallons without stagnation, avoids recontamination
By improving the reverse osmosis membrane the flow rate increases, as a result the volume of clean water may reach up to 400 gallons. The new Mi Water Purifier 2 is much faster than the previous version. And thanks to the separate storage tank the water does not stagnate. This eliminates the risk of its recontamination, and you always get a crystal-clear water
Through the use of reverse osmosis filtration technology Mi Water Purifier 2 allows you to drink clean water, which is purified with an accuracy of 0,0001 μm.
Four high-precision filters for deep cleaning
The filter system of four layers for water purification will help you to remove rust, heavy metals, bacteria and unpleasant odors. Each drop of water becomes perfectly clean and fresh thanks to 4 filters:
Intelligent water purification technologies
Water purification is faster by 40%
Stainless steel tap, safety and health
We have used the 304 stainless steel to create the tap of the purifier. Thanks to the precise casting process we have managed to make the inner surface of the tap perfectly smooth and clean, in accordance with the national standard.
Fast and easy filter replacement
The simplicity of the purifier system assembly makes it easy and quick to change the filter without any special tools.
More free space
Mi Water Purifier 2 allows you to save space, because its dimensions (length and width) are equal to the classic sheet of A4 paper. Without the huge water tank you will save up to 60 % more space in comparison with the previous version.
1. Filter cartridge with PP cotton
Eliminates the precipitate, turbidity, rust, etc.
Filtering accuracy up to 5 microns. “From the outer sides to the inner” technology
In order to extend the service life, the Mi Water Purifier 2 PP cotton filter cartridge is soft on the outside and smooth inside. The filler is spent gradually — starting from the outside and to the inside layer by layer. This not only increases the efficiency of the filter cartridge, but also prevents the secondary pollution of water.
3. Reverse Osmosis Filter (RO)
First-class filter materials DOW / GE from the USA