Original Littlefuse PTC Resettabe Thermal Fuse 1206L050THYR/ Fuse 500mA 0.5A 1206
The 1206L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired.
Littelfuse,Surface Mount Device fuses, 1206 series, designed in America
Model | Marking | Ihold (A) | Itrip (A) | Vmax (Vdc) | Imax (A) | Pd typ. (W) | Maximum Time To Trip | Resistance | Agency Approvals | |||
Current (A) | Time (Sec.) | Rmin (Ω) | R1max (Ω) | |||||||||
1206L012 | A | 0.125 | 0.29 | 30 | 100 | 0.6 | 1.00 | 0.20 | 1.500 | 6.00 | × | × |
1206L016 | B | 0.16 | 0.37 | 30 | 100 | 0.6 | 1.00 | 0.30 | 1.200 | 4.50 | × | × |
1206L0201 | C | 0.20 | 0.42 | 24 | 100 | 0.6 | 8.00 | 0.10 | 0.650 | 2.60 | × | × |
1206L0251 | D | 0.25 | 0.50 | 16 | 100 | 0.6 | 8.00 | 0.08 | 0.550 | 2.30 | × | × |
1206L0351 | E | 0.35 | 0.75 | 6 | 100 | 0.6 | 8.00 | 0.10 | 0.300 | 1.20 | × | × |
1206L035/16 | J | 0.35 | 0.75 | 16 | 100 | 0.6 | 8.00 | 0.10 | 0.300 | 1.20 | × | × |
1206L0501 | F | 0.50 | 1.00 | 6 | 100 | 0.6 | 8.00 | 0.10 | 0.150 | 0.70 | × | × |
1206L050/15 | M | 0.50 | 1.00 | 15 | 100 | 0.6 | 8.00 | 0.10 | 0.150 | 0.75 | × | × |
1206L075/13.2 | G1 | 0.75 | 1.50 | 13.2 | 100 | 0.6 | 8.00 | 0.20 | 0.090 | 0.35 | × | × |
1206L075/16 | GF | 0.75 | 1.50 | 16 | 100 | 0.6 | 8.00 | 0.20 | 0.090 | 0.290 | × | × |
1206L075TH1 | G | 0.75 | 1.50 | 8 | 100 | 0.6 | 8.00 | 0.20 | 0.090 | 0.29 | × | × |
1206L110TH1 | H | 1.10 | 2.20 | 8 | 100 | 0.8 | 8.00 | 0.10 | 0.040 | 0.21 | × | × |
1206L150TH1 | K | 1.50 | 3.00 | 8 | 100 | 0.8 | 8.00 | 0.30 | 0.040 | 0.12 | × | × |
1206L175 | V | 1.75 | 3.50 | 6 | 100 | 0.8 | 8.00 | 0.50 | 0.020 | 0.09 | × | × |
1206L200 | L | 2.00 | 3.50 | 6 | 100 | 0.8 | 8.00 | 1.50 | 0.018 | 0.08 | × | × |
Vmax=Maximum voltage device can withstand without damage at rated current (Imax).
Imax=Maximum fault current device can withstand without damage at rated voltage (Imax).
Ihold=Hold Current: Maximum current device will sustain for 4 hours without tripping in 25oC still air.
Itrip=Trip Current: minimum current at which the device will trip in 25oC still air.
Pd=Power dissipated from device when in the tripped state at 25oC still air.
Ri=Minimum/Maximum resistance of device in initial (un-soldered) state.
R1max=Maximum resistance of device at 25oC measured one hour after tripping.
Caution=operation beyond specified ratings may result in damage and possible arcing and flame.
Most products are packed in Tape and Reel according to EIA-481-1 standard. Carton and foam are used for outer packing to support long distance transportation.
JDT Fuse provides
1. pre sales part selection guide
2. fast acting logistics service through our Hongkong and Shenzhen logistic centers
3. after sales problem shooting service
4. testing and measuring service for all products sold
5. solution for relevant parts based on customers requirment
JTD Fuse Industrial Co., Ltd is specialized in the circuit protection market for over 15 years. We offer a full range of overcurrent and overvoltage products, including fuses, PTC resettable fuses, TVS diodes, ESD suppressors, varistors, and GDTs. Applications include power supplies and data transmission, consumer electronics, energy industry, medical equipment, auto industry, aviation, and telecom industry.
JDT Fuse has its own production base in Huizhou City, where all JDT products are produced. At the meantime, JDT Fuse (and its former company “changing”) has been distributing World No. 1 Brand Littelfuse since 2009.
Annual revenue of JDT Fuse reached 25,000,000RMB.
Our strengths are
History of JDT Fuse
1999 – Changing Electronics was established in Taiwan, focusing on the circuit protection devices
2000 – Changing Electronics became the distributor of World-Leading Brand Littelfuse
2002 – Changing Electronics registered its own brand “jdtfuse”
2003 – Changing Electronics has made important improvement in technology. Radial leaded resettable fuse was produced in Huizhou Factory, Guangdong
2004 – Changing Electronics Shenzhen office was established
2005 – Lead Free process was introduced in production
2007 – Changing Electronics HongKong office was established
2009 – Changing Electronics started to produce “jdtfuse” surface mount resettable PTCs
2011 – Halogen Free process was introduced in production
2012 – “Changing Electronics” was renamed as “JDT Fuse Industrial Co., Ltd”