WS1208 is a 5G router dual-core CPU MT7621A frequency can reach 880MHz, plus 5G WiFi chip MT7612E and 2.4G wiFi chip MT7603E, full Gigabit network port, wireless rate can reach 5G 867Mbps/2.4G 300Mbps, internal a MINI PCIE interface, you can Add a 4G or 5G module to use with a SIM card and a usb3.0 interface, which is very powerful and can provide stable network to multiple users at the same time.
1. Overview of WS1208 router attributes
2. Router connection profile page
3. Router network status
4. Modem Band Locking
For the WS1208 modem, there is a feature that allows you to lock the modem to only use certain frequency bands. This can be used to force the modem to perform CA on certain frequency bands, or to lock weaker frequency bands that the modem is still connected to.
The WS1208 modem supports 3xCA and a button will appear to switch between 2xCA and 3xCA.
Select the bands you wish the modem to work with and lock the mode to those. The Scan button will scan the area for other cells and display them for you. This allows you to see what bands are usble in your area.
Specification
Technical Specification | |||
SOC | MT7621A+MT7612E+MT7603E 880MHz dual-core MIPS1004Kc CPU |
||
RAM | 128x16bit DDRIII SDRAM,16MB SPI Flash Supports up to 256Mx16bit DDRIII, 32MB SPI Flash |
||
Wireless Frequency Band | Wi-Fi 1: 11b/g/n : 2.412~2.484 GHz Wi-Fi 2: 11a/n/ac : 5.180~5.825 GHz GPS:1565.42~1585.42 MHz |
||
Wireless Specification | Maximum access rate of 1167Mbps (2.4G 300Mbps + 5G 867Mbps) | ||
PCBA size | L200mm x W175mm x H17mm | ||
Maximum Power Consumption | Max. power consumption 24W | ||
Physical Interface | WAN x 1+LAN x 4 : RJ45 interface ,10/100/1000 Fast Ethernet Power connector: 5.5mm DC socket, DC12V2A power input USB interface: 1 USB3.0 female socket LTE interface: 1 MiNi PCI-E female connector, connects to USB2.0 interface LTE module, 1 drawer SIM card holder Buttons: 1 button to return to factory settings |
||
LEDs | PWR x 1 | Green | Power on Active |
SYS x 1 | Green | Software Definition to MT7621A-GPIO? Low Active |
|
WLAN -5G x 1 | Green | to MT7612E Low Active |
|
WLAN-2G x 1 | Green | to MT7603E Low Active |
|
LTE-LEDx2 | Green | Software Definition to MT7621A-GPIO? Low Active |
|
Other | Green | Software Definition to MT7621A-? Low Active |
|
Power Requirements | DC12V2A | ||
Wireless Settings | Working Mode AP/WDS/Repeater Wireless mode 11b/ 11g /11n /11a /11ac Channel selection (Display the number of channels in different areas by country setting) Channel bandwidth (Auto, 20Mhz, 40Mhz, 80Mhz,) |
||
Receiving Sensitivity | 802.11b -92dBm @ 1Mbps -83dBm @ 11Mbps 802.11ag -91dBm @ 6Mbps -76dBm @ 54Mbps 802.11n HT20 -91dBm @ MCS0 -70dBm @ MCS7 802.11n HT40 -88dBm @ MCS0 -67dBm @ MCS7 802.11ac HT80 -85dBm @ MCS0 -58dBm @ MCS9 |
||
Antenna | External detachable 5DBi high gain omni-directional antenna | ||
Environmental and Physical Parameters | |||
Operating Temperature | -20°C ~ 55°C | ||
Storage temperature | -40°C ~ 70°C | ||
Humidity | 0%~90% Typical, non-condensing |
AQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 1-3 working days, mass production time needs 3-5 weeks based on order quantity.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. Do your products meet our standards?
A: Yes, almost all our products have CE,ROHS,FCC,etc.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Then we arrange the production.