One-way Plastic Beer Keg PET Preform 403gram for 20L,30L Beer keg

one-way use 20-30L Plastic beer keg Preform:
For blowing 20-30L plastic beer keg
Available weight grams 200grams till 405 grams


The preforms are made of PET materials which has past the health organization authorization of Chinese government and CMA testing certification.

Features:
1) 100% new material
2) High transparency
3) High toughnes
4)48-60mm screw type neck size.
5) We can produce preforms in according with customer special requirements after opening new moulds or modifying our existing moulds
6) different colors can be choose

Production Process

1 Deep drawing: Special drawing presses are used to produce highly accurate, precision-dimensioned, smooth-surfaced deep-drawn parts from circular blanks.

2 Forming: Technical crimping of beads in the cold-formed keg halves. Cutting the keg halves. Making the bunghole in to half of the keg.

3 Welding in the necks: The necks are automatically welded in the top keg halves using a special method.

4 Embossing and labeling: Customer-specific data are embossed or stamped on the kegs in a special press. Such data include the customer’s name, logo, type approvals and serial numbers

5 From bending, welding, rolling: The chime strips are rolled into rounds, tensed and welded fully automatically to produce the chime rings. These are rolled in a hydraulic forming press equipped with special tools. 

6 Stamping and forming: The hand and drain holes are stamped and punched fully automatically by precision machines. All parts are mechanically deburred safe handling. 

7 Welding the chimes on the keg halves: The chimes are welded on the top and bottom keg halves by special welding methods.

8 Circumferential welding of the two keg halves: The keg halves are welded together to obtain the complete keg on fully automatic circumferential welding machines. Hygienic, smooth, narrow, flat weld seams and perfect weld root, especially on the side in contact with the product.

9 Pickling, pre-rinsing, passivation, rinsing: The kegs are pickled, rinsed and passivated inside and out, to ensure a grease-free, hygienically sealed surface.

SUS304/2B, the thickness is using 1.2mm, 1.5mm, 18mm, 2.0mm according to the capacity and customer’s requirements.

5. The pressure test

The keg is pressed with 0.5MPa and kept 3 minutes.