Product Name | SONY CCD Analog Camera Module |
Model | TT-SO60CO |
Video Output | 1/3"SONY SUPER HAD CCD |
Image Sensor | 1/3 SONY SUPER HAD II CCD |
Horizontal Resolution | 600TVL |
Effective Pixel | PAL:753(H)*582(V),NTSC:768(H)*494(V) |
Signal System | PAL/NTSC |
Synchronization | Internal |
Auto White Balance | Manual/Auto/Auto tracking |
S/N Ratio | >60dB(AGC OFF) |
Electronic Shutter Speed | PAL:1/50-1/100,000sec;NTSC:1/60-1/100,000 |
Auto Gain Control | off/low/mid/high optional |
Back light compensation (BLC) | off /BLC/ anti-exposure |
Motion Detection (MD) | On/Off (multi-level sensitivity) |
Min.Illumination | 0.1LusF2.0 |
Shading Area | 8 |
Video Output | 1.0Vp-p 75 ohm BNC output |
Power | 12V DC (±10%) |
Negative/ positive | Negative/ positive optional |
Edge light compensation | Yes |
Display Mode | LED monitor/ Flat monitor |
Synchronize IR turn on and color turn to B&W | Yes (optional) |
IR image optimize | Anti exposure of the object in the middle |
DNR | 2DNR |
Day/ Night Switch | Auto/Color/B&W/Outside control (position start and end controllable) |
Day/ Night time switch | 2~63 Switchable time |
OSD | Chinese/ English Menu |
White dot repair | Yes |
Image adjust | Yes |
Function Control | OSD |
Dimensions | 38mmx38mm or 32mmx32mm optional |
Operation Temp. | –10 C~50 C |
Operation Environ. | 10%~90% |
Size | 25*45mm |
Product Name | SONY CCD Analog Camera Module |
Model | TT-SO60CO |
Video Output | 1/3"SONY SUPER HAD CCD |
Image Sensor | 1/3 SONY SUPER HAD II CCD |
Horizontal Resolution | 600TVL |
Effective Pixel | PAL:753(H)*582(V),NTSC:768(H)*494(V) |
Signal System | PAL/NTSC |
Synchronization | Internal |
Auto White Balance | Manual/Auto/Auto tracking |
S/N Ratio | >60dB(AGC OFF) |
Electronic Shutter Speed | PAL:1/50-1/100,000sec;NTSC:1/60-1/100,000 |
Auto Gain Control | off/low/mid/high optional |
Back light compensation (BLC) | off /BLC/ anti-exposure |
Motion Detection (MD) | On/Off (multi-level sensitivity) |
Min.Illumination | 0.1LusF2.0 |
Shading Area | 8 |
Video Output | 1.0Vp-p 75 ohm BNC output |
Power | 12V DC (±10%) |
Negative/ positive | Negative/ positive optional |
Edge light compensation | Yes |
Display Mode | LED monitor/ Flat monitor |
Synchronize IR turn on and color turn to B&W | Yes (optional) |
IR image optimize | Anti exposure of the object in the middle |
DNR | 2DNR |
Day/ Night Switch | Auto/Color/B&W/Outside control (position start and end controllable) |
Day/ Night time switch | 2~63 Switchable time |
OSD | Chinese/ English Menu |
White dot repair | Yes |
Image adjust | Yes |
Function Control | OSD |
Dimensions | 38mmx38mm or 32mmx32mm optional |
Operation Temp. | –10 C~50 C |
Operation Environ. | 10%~90% |
Size | 25*45mm |