Oil and gas field buffer oil tank / surge buffer tank pressure vessel
Buffer tank is a service vessel designed to store liquid hydrocarbons after separation. It is used to verify the accuracy of the oil flow gauge of separator, measure oil output, and further proceed separation from the crude oil which is separated from the separator.Meanwhile it can prevent gas gathering to produce H2S.It is not only a second stage separator but also a metering tank, holding a constant backpressure by using its automatic pressure control valve on the gas outlet.
The technical parameters about oil and gas field buffer oil tank / surge buffer tank pressure vessel
Total Capacity | Work Pressure | Work Temperature | Inlet and Outlet Thread Type | Weight lbs (kg) |
Dimension High×Length×Wide ft (m) |
Sampling Point |
2×50 (-16) | 50 (-3.5) | -0.2 (-29/38) |
2'' / 3''fig602 inlet 2'' / 4'' fig602 outlet 4'' fig206 t gas outlet 4'' fig 206 release outlet 2'' fig206 relief outlet 2''150#spare top |
14300(-6486) |
18.8×9.9×8 (5.7×3×2.5) |
one each side |
Main features of our oil and gas field buffer oil tank / surge buffer tank pressure vessel as below:
1.Single or dual compartment.
2.Sight glasses or magnetic level indicators.
3.High-level and low-level alarm system.
4.Automatic pressure-control valve normally open on gas outlets.
5.Diverter, vortex breaker, and stiffening rings.
6.Bypass manifold allows isolating surge tank from flow process.
7.Fitted with sampling points and pressure and temperature ports.
We design ,manufacture and sell a series of well testing equipments, welcome customization of multiple configuration, sizes, and pressure ratings to meet individual customer needs.