Model | PWMI 1500W |
Battery | |
Rated voltage | 12Vdc/24Vdc |
Charge current | 15A(default) 20%--100% configurable P3, configurable |
Charge voltage | P2, configurable |
Input | |
AC voltage range | 85-138Vac/170-275Vac |
Frequency | 45-65Hz |
PV input voltage | PWM 12Vdc:18V-30V (Recommend:18V)/ PWM 24Vdc: 28-50V(Recommend:36V) |
PV charge current | 50A |
Output | |
Voltage range | 220Vac±5%(inverter mode) |
Frequency | 50/60HZ± 1%(inverter mode) |
Wave | Sine pure wave |
Transfer time | < 10ms |
Efficiency | >85%(80% resistive load) |
Overload | 110%-120%/30s; >160%/300ms |
Protetion | Battery over and low voltage protection, overload, short circuit and over temperature protection |
Working temperature | 0-40℃ |
Store temperature | -15℃~+50℃ |
Working/Store environment | 0-90% no condensation |
Protection level | IP65 |
Size | 275*272*133mm |
Packing | 330*330*188mm |
Energy saving modeEnergy saving mode | |
Switching mode | Switch manually on the operator panel |
Operation mode | During inverter operation, if the output load is less than 5% of the rated load, the inverter turns off the output and is in standby state. After 10 seconds, the inverter restarts and checks the load condition. If the output load is greater than the rated load 10 %, the inverter is automatically turned on. If it is still less than 5%, repeat the above steps. |