Odorless Eco-friendly Interior Emulsion Wall Paint

Features:

1.Effectively covering hairline cracks
2.Stain and water resistant, easy for cleaning

3.Super Scratching resistant
4.Anti-fungus and alkaline resistant
5.Fresh smell

Technical Index:
Solvent Type: Water-base
Resin Type: Acrylic acid
Gloss:Matt(10~15% on a 60°meter)
Color: White and colors
Viscosity: 95~105KU
Specific Gravity: Approximately 1.44-1.46kg/L

Maximum VOC content: 80g/L
Solid Content (by weight): ≥55%(standard sample)

Recommended film thickness per coat:

Wet: 100μm Dry: 40μm
Theoretical coverage per coat: 13-16m2/kg/coat

Average dry time at 77°F/25°C:

To touch: 0.5-1 hours

Recoat: 4-5 hours
Dilution Ratio (%, with tap water): 20 (vary depending on application method)

Application Method: Brush, Roller, and Spray 

          Guangdong Maydos Building Materials Co.,Ltd, founded in 1995, is located in Shunde district,Foshan, Guangdong province , it now becomes one of the top 10 chemical enterprises in China. Maydos is mainly specialized in manufacture of high quality Architectural Building Paint,Floor Paint, Wood Lacquer,Industrial Anti-Rust Paint, Road Paint,Chloroprene Rubber Adhesive, SBS Adhesive, PU Adhesive, Emulsion Glue. 

1.What kind of problems will face in paint application?

Paint applications are prone to the following questions:

Peeling Off: This is the use of low-grade putty, causing poor adhesion of paint peeling off the wall;
Bulbing: wall was not completely dry, water evaporating or within the walls of the film causing drumming;
Chalking: wall loose, excess water or when the temperature is below the application requirement;
Crack: wall (or substrate) cracking, is by the use of poor quality putty;

Fade: the wall was not full dry, and the wall was too alkaline, mainly caused by paint quality problem.

2.What are the advantages and disadvantages of using brush or roller?

 Brush is the first and easiest method of painting, for painting objects of any shape, the disadvantage is inefficient, labor-intensive, general decorative properties. Roller in the other-hand is suitable for large-scale construction, high efficiency than brushing, but somewhat less decorative.

3.How to apply effectively by using a roller? 

Brush dipped in paint no more than half of the brush hair, and if the brush roots stained paint, paint brush will be deformed, brush life will be shortened. Stained paint brush paint brush before the inner surface of the container must apply onto it, so as to remove excess paint dripping paint to the ground. Should start brushing paint brush vertically as far as possible, with the bristles brushing the abdomen, in the last rationalize paint brush over paint when received, will brush flatly, brush lightly with the tip of the bristles.

4.How to deal with old interior wall refurnishing?

Be sure to use the tool to eradicate the entire old, mutilated old paint surface. For complete old paint surface, use yarn polished smoothly. If it stick wallpaper and maintained a good surface condition, you can also be directly brushing paint. When brushing, to different climatic conditions and brushing tools, dilute with small amount of water.

5.How to paint new interior wall? 

The new wall must be fully dried; the surface moisture should be less than 10%. You can use putty to the wall batch level. In order to make the film firmly smooth, color durable, require the use of water-based or oil seal wall paint primer.

6.How to paint exterior wall? 

From roof to floor, gutters, capitals, beam and rafters to the walls, doors and floor. Wherein the top to bottom of each section also be painted. In brushing every part, you cannot stop halfway, if need to stop, choose of the original building structure joints, such as wall and window frames on connection. This will avoid unsightly seams.

7.How to paint windows?

Hinged horizontal are to push open the window before painting. The order is at the top, sides, bottom, and later a bar, window frame, window sill plates and top line.

8.What are the types of paint tools?

A.Brush   B. Roller   C. Spray Gun

9.I know the floor area of the room, how to calculate their brush area? 

If you know the room floor area and room high 2.5 m: You can use floor area * 3, get the brush area. If the room is more than 2.7 m or less than 2.5 m, you can increased or decreased corresponding to the coefficient.