OS large flow volute single stage double suction split-casing centrifugal water pump
Perfect appearance:
Introduction:
1. OS high flow rate industrial water pump single-stage multi-stage double suction centrifugal pump large split case volute pump is a large flow rate centrifugal pump.
2. Compact structure nice appearance, good stability and easy installation.
3. Stable running the optimally designed double-suction impeller makes the axial force reduced to the minimum and has a blade-style of very excellent hydraulic performance, both internal surface of the pump casing and the impeller a surface, being precisely cast, are extremely smooth and have a notable performance vapour corrosion resisting and a high efficiency.
4. The pump case is double volute structured, which greatly reduces radial force, lightens bearing's load and prolongs bearing's service life.
5. Bearing to use high quality brandname bearings to guarantee a stable running, low noise and long duration.
6. Shaft seal use BURGMAN mechanical seal or packing seal.
Main application:
Water works, irrigation, draining pump station, electric power station, air-conditioning circulation water, industrial water supply system, fire-fighting, shipbuilding industry and general use in oil refining industry.
Product details:
Working Principle: |
Double suction, Split case |
Main applications: |
Water |
Driver: |
Electric motor, Diesel engine |
Power Specs: |
220V/380/415V/high voltage, 3phase;50hz/60hz |
Max. permissible fluid temperature: |
105°C(221°F) |
Type of connection: |
Flange |
Installation position: |
Horizontal |
Pump casing material: |
Gray cast iron, Ductile iron, Stainless steel |
Impellermaterial: |
Gray cast iron, Ductile iron, Stainless steel, Bronze |
Shaft seal type: |
Mechanical seal, packing seal |
Maximum drive rating: |
5000KW(6700HP) |
Maximum caliber: |
1600mm(64inch) |
Maximum head: |
170m(557.6ft) |
Maximum discharge-side pressure: |
1.7MPa(17bar) |
Flow rate range: |
47-28500m3/h(206.8-125400US.GPM) |
Structure diagram
Main part materials
Part |
Material |
Pump casing |
Grey cast iron (HT250) Ductile iron (QT400-18) Cast steel (ZG230-450) Stainless steel (ZG1Cr18Ni9Ti) |
Impeller |
Bronze (ZCuSn10Pb1) Grey cast iron (HT250) Ductile iron (QT400-18) Silicon brass (ZCuZn16Si4) Stainless steel (ZG1Cr18Ni9Ti) |
Shaft |
Carbon steel (45#) Stainless steel (ZG1Cr18Ni9Ti) |
Seal-ring on pump casing |
Bronze (ZCuSn10Pb1) Grey cast iron (HT250) Silicon brass (ZCuZn16Si4) Stainless steel (ZG1Cr18Ni9Ti) |
Performance data:
Pictures:
Excellent product made of carefully selected high-quality materials:
Single stage impeller type
Double stage impeller type and multi-stage impeller type
Diesel engine type