24w 24v DIN Rail Power Supply
OVERVIEW
D24-24 is one economical slim 24W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
D24-24 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 85%, the entire series can operate at the ambient temperature between -40℃ to 70℃ under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus make D24-24 a very competitive power supply solution for industrial applications.
Application
Industrial Control System
TECHNICAL SPECIFICATION
Model | D24-24 | ||
Output | Group of Output | 1 | |
| DC Voltage | 24V DC | |
| Default Output Voltage | 24.00-24.2V (VIN: 220VAC / LOAD: 0A) | |
| Output Rated Current | 1A | |
| Output Current Range | 0-1A | |
| Output Rated Power | 24W | |
| Total Peak Output Power | Up to 36W(Sustainable time 10S/220VAC) | |
| Peak Output Current | 1.5A( Sustainable time 10S/220VAC) | |
| Ripple noise | Peak - Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz) | |
| Output Regulation Range | 22.5.V~28.0V | |
| Stabilized Voltage Precision | ±1% (@ 90-264Vac input, 100% load) | |
| Line Regulation | ±0.5% (@ 90-264Vac input, 100% load) | |
| Load Regulation | ±1% (@ 90-264Vac input, 100% load) | |
| Temperature Coefficient | ±0.03%/℃ | |
| Output Start Time | < 3S @ 115Vac | |
| Output Hold Time | > 20ms @ 115Vac (100% load) | |
| Voltage Overshoot | ≤5% | |
Input | Input Voltage Range | 90~264VAC | |
| Input Rated Voltage Range | 100~240VAC | |
| Frequency Range | 47Hz~63Hz | |
| Rated Frequency | 50/60Hz | |
| Starting Voltage | 90V AC | |
| Efficiency | > 85.0% @ 115Vac, > 84.0% @ 230Vac | |
| Input Current | < 0.60A @ 115Vac, < 0.30A @ 230Vac | |
| Inrush Starting Current | < 60A @ 230Vac | |
| Power Factor | >0.6 (at full load) | |
Protection | Output | Over power | 28.8~36W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.) |
|
| Over voltage | 28~30V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage. |
|
| Over current | 1.2~1.5A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.) |
|
| Short circuit | It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit. |
Operation Environment | Operation Temperature and Humidity | -40~70℃; 20%~95%RH | |
| Storage Temperature and Humidity | -40℃~85℃; 10%~95%RH non-condensing | |
| Libration | Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis | |
| Surge | Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis | |
| Altitude | 2000m | |
Safety and EMC Standard @25℃ | Security Standard | GB4943/EN60950 ■Reference □Certification | |
| Dielectric Strength | Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min. | |
| Grounding Test | Test Condition: 32A/2min; Ground bond: <0.1 ohms. | |
| Leakage Current | Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz) |
FAQ
Why choose us?
As the first manufacturer for intelligent POE in China, with a fine industrial manufacturing environment, ONV established a strategic technology cooperation with Micros-emi who produces the most strongest POE chip solution in the world.
How about the after-sale service?
1. All products are under strict quality control and well tested for 3 times before shipment;
2. According to the survey, the repair rate of our products is 3‰ ~5‰, which is the lowest in the peer.
3. Any problem, pls feel free to contact us.
How many years of the warranty?
The warrany of the commercial products is 3 years while the industrial products is 5 years.
RELATED PRODUCTS
24w 24v DIN Rail Power Supply
OVERVIEW
D24-24 is one economical slim 24W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
D24-24 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 85%, the entire series can operate at the ambient temperature between -40℃ to 70℃ under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus make D24-24 a very competitive power supply solution for industrial applications.
Application
Industrial Control System
TECHNICAL SPECIFICATION
Model | D24-24 | ||
Output | Group of Output | 1 | |
| DC Voltage | 24V DC | |
| Default Output Voltage | 24.00-24.2V (VIN: 220VAC / LOAD: 0A) | |
| Output Rated Current | 1A | |
| Output Current Range | 0-1A | |
| Output Rated Power | 24W | |
| Total Peak Output Power | Up to 36W(Sustainable time 10S/220VAC) | |
| Peak Output Current | 1.5A( Sustainable time 10S/220VAC) | |
| Ripple noise | Peak - Peak ≤100mV (Test Method: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz) | |
| Output Regulation Range | 22.5.V~28.0V | |
| Stabilized Voltage Precision | ±1% (@ 90-264Vac input, 100% load) | |
| Line Regulation | ±0.5% (@ 90-264Vac input, 100% load) | |
| Load Regulation | ±1% (@ 90-264Vac input, 100% load) | |
| Temperature Coefficient | ±0.03%/℃ | |
| Output Start Time | < 3S @ 115Vac | |
| Output Hold Time | > 20ms @ 115Vac (100% load) | |
| Voltage Overshoot | ≤5% | |
Input | Input Voltage Range | 90~264VAC | |
| Input Rated Voltage Range | 100~240VAC | |
| Frequency Range | 47Hz~63Hz | |
| Rated Frequency | 50/60Hz | |
| Starting Voltage | 90V AC | |
| Efficiency | > 85.0% @ 115Vac, > 84.0% @ 230Vac | |
| Input Current | < 0.60A @ 115Vac, < 0.30A @ 230Vac | |
| Inrush Starting Current | < 60A @ 230Vac | |
| Power Factor | >0.6 (at full load) | |
Protection | Output | Over power | 28.8~36W Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-power released.) |
|
| Over voltage | 28~30V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Note: Do not use external voltage. |
|
| Over current | 1.2~1.5A Swing machine (Testing method: Increase the output current until enabling the protection. Protection mode:Swing machine, Self-recovery after over-current released.) |
|
| Short circuit | It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) with power output port. Self-recovery to normal after removing the short circuit. |
Operation Environment | Operation Temperature and Humidity | -40~70℃; 20%~95%RH | |
| Storage Temperature and Humidity | -40℃~85℃; 10%~95%RH non-condensing | |
| Libration | Frequency range: 10 ~ 500Hz, Acceleration: 2G, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis | |
| Surge | Acceleration: 20G, Duration time: 11mS, Three shocks along X, Y and Z axis | |
| Altitude | 2000m | |
Safety and EMC Standard @25℃ | Security Standard | GB4943/EN60950 ■Reference □Certification | |
| Dielectric Strength | Input—Output:3KVac/10mA; Input--Case:1.5KVac/10mA; Output---Case:0.5KVDC/10mA Time for each testing is 1min. | |
| Grounding Test | Test Condition: 32A/2min; Ground bond: <0.1 ohms. | |
| Leakage Current | Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz) |
FAQ
Why choose us?
As the first manufacturer for intelligent POE in China, with a fine industrial manufacturing environment, ONV established a strategic technology cooperation with Micros-emi who produces the most strongest POE chip solution in the world.
How about the after-sale service?
1. All products are under strict quality control and well tested for 3 times before shipment;
2. According to the survey, the repair rate of our products is 3‰ ~5‰, which is the lowest in the peer.
3. Any problem, pls feel free to contact us.
How many years of the warranty?
The warrany of the commercial products is 3 years while the industrial products is 5 years.
RELATED PRODUCTS