OE dashboard sensor Car Parking sensor front and rear sensors suitable for toyota prado landcruiser RAV4
Sensor Detecting distance
Sensor Detection Distance | |||
Gear Position | Two center front sensors | Two side front sensors | Four rear sensor |
90cm | 75cm | 110cm | |
D position | Work | work | Don't work |
R position | Don't work | work | Work |
N position | Don't work | Don't work | Don't work |
Working Method
while the speed is on below 15km/h | Work |
while the speed is on over 20km/h | Do not work |
Notice:
According the sensor number requirments and different vehicle type, the actual accessory has a little bit different.
Installation Steps:
1.Electric hole opener needs to drill from Counterclockwise direction
2.The original car has reserved the installation location
Use a Electric drill with a special drill head to punch holes from the inside of the bumper
3.After drilling holes, wipe it with 3M detergent
4.Apply the adhesion promoter to the location where it will be installed.
5.Stick and press tightly to the sensor bracket
The Original Car Dashboard Sensor Apply To Accord,Gary,City,Crider,Avancier,Civic,Urv,Crv,Inspire,Vezel,Xrv - Buy Oem Parking Sensor Display On The Original Dash,For Hondaa Car Model Product on Alibaba.com