Non Contact Ultrasonic Fuel Tank Sensor External Clamp Fuel Level Sensor
Production Overview
Ultrasonic fuel / oil level sensor is the oil quantity monitoring equipment designed for management personnel of enterprise motorcade. It can prevent gasoline theft by drivers, optimize transportation cost, the driver’s driving action and assist statistical decision, etc. The sensor uses ultrasonic probe to detect the oil level height and carries out smart processing for height signal of oil quantity through built-in program of the main body. Then it sends the oil quantity information to the system platform through GPS to generate the oil quantity report after analysis. The sensor supports serial port and analog output and can connect with GPS of most brands/Beidou all-in-one machine. Therefore, the sensor can be connected with the backstage monitoring system easily.
The products adopt non-contact measurement ultrasonic wave sensor technology developed independently by our company and first created domestically and are widely used in fuel consumption monitoring projects for vehicles and sold overseas.
Product characteristics
High precision: The resolution ratio of oil level height measurement of the oil level sensor is 0.1mm and the measurement accuracy is ±0.5%. High measurement accuracy can be guaranteed at high temperature and high cold external environment.
Good long-term stability: The oil level sensor adopts ultrasonic wave measurement method and performs non contact measurement. It is different from the float-type, pressure type, magnetic sliding system measurement methods that adopt direct contact measurement methods at present generally so as to avoid corrosion and pollution of oil level sensor by fuel oil and maintain long-term stability.
Easy installation and maintenance: It only needs to install the sensor probe at the lower part of external fuel tank. There is no need to change the existing measurement system of the fuel tank, no need to drill hole and make change on the fuel tank. At the same time, it can guarantee normal operation of former oil meter of vehicles.
Environmental sound, small energy consumption. Non contact measurement makes it unnecessary to bore hole on or modify the fuel tank. No dirt and pollution will be brought to the fuel oil.
Strong reliability: Still work normally at hostile environment; anti-damp, anti-acid, inflaming retarding, anti-interference and Intelligent.
The product can be used independently by using the auxiliary display screen. It may also be used with GPS equipment by transferring the data to backstage through GPS equipment for data statistics, statement analysis and query.
Technical parameters
Operating voltage | 9~36VDC |
Maximum power consumption | 0.8W/12VDC |
Work temperature | -40℃~+85℃(Industry level) |
Working humidity | 5%~90% |
Measurement range | 5~200cm (For steel plate of 5mm thick, determined according to materials and thickness of the container) (300cm can be Customized ) |
Pressure bearing scope | ≤0.8kg or 0.8MPa |
Liquid measurement accuracy | ±1% |
Equipment interface | Provide output port of analog voltage/current, RS232 and RS485 data port. |
Communication port parameters | The default baud rate is 9600. No check bit, 8-digit data bits, 1-digit stop bit and no fluid control. The liquid level value measured by the sensor in a real-time manner is given per 10s after smoothing processing. Note: The baud rate and interval of data transmission can be customized. |
Applicable
The ultrasonic fuel level sensor is geared to all types of vehicles (such as logistics vehicles, taxi, buses and passenger cars, etc) to record the refueling, oil consumption of vehicles with digitalization to prevent occurrence of fuel theft, avoid resources waste, improve management efficiency and traffic safety and enhance operation management level.
* Standardized workshop and process
* Strict professional quality inspection
* Return is supported if the product is unqualified.
* Fast delivery
* Warranty for 1 years
Xi'an Desun Uniwill Electronic Technology Co., Ltd. was established in March 2019,registered capital of 5 million,and is located in Xi'an High-tech Development Zone. Relying on the abundant university resources in Xi'an, it has carried out technical cooperation with many universities and scientific research institutions, and is committed to monitoring the water environment.
The company is a high-tech company integrating production, R&D, sales, after-sales service and engineering services.
Multi-parameter water quality sensors (five parameters / seven parameters), optical dissolved oxygen, fiber turbidity, four-electrode conductivity, blue-green algae, chlorophyll, water oil and COD have been introduced. Widely used in water environmental protection, sewage treatment, industrial process monitoring, aquaculture, groundwater monitoring, water plants, petrochemical enterprises, small and medium-sized environmental protection companies, food fermentation and pharmaceuticals. Through water environment monitoring equipment, water quality can be monitored more effectively during processing, discharge and recycling.
We actively innovate, continuously improve our products, and optimize industry application solutions. Based on the current rapid development of IoT technology, we also launched wireless water quality monitoring solutions. Combine smart phones, tablets and traditional measuring instruments through wireless transmission to create a real-time dynamic water quality monitoring system, marine environmental monitoring system, fishery water monitoring system, and provide complete solutions.
Q: Is your company a manufacturer??
A: Yes,we are a professional manufacturer of online water quality monitoring products: oil in water sensor/ DO sensor/ NH4-N sensor / ORP / COD sensor / Blue-green algae sensor /Conductivity sensor /TDS / TSS /MLSS,ect.
Q: What parameters do you need for product selection?
A: Application, Range, Power supply and Output signal.
Q: How about the quality of the managements?
A: We have a complete quality control system, our products will be fully pre-inspection before shipping to you. We have the certification of ISO, CE, we could send the certification test of our company to you.
Q: Can you offer OEM services?
A: Yes,we support OEM and ODM products according to your requirements.
Q: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q: How about warranty?
A: 12 months warranty