NitroOBD2 Performance 35% increasing More Power Chip Eco obd2 Tuning Box for benzine Cars

Nitroobd2 increase the performance of  your car, Ecoobd2 Reducing Fuel Consumption For The Economy And Lower Emission.

EcoOBD2 Chip tuning Box

EcoOBD2 for Benzine: Green 

EcoOBD2 Diesel: Blue

EcoOBD2: Lower Fuel and Lower Emission

EcoOBD2 finds out the hidden power of your car.

- Up to 15% fuel savings

Installation and Calibration

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)

5 - Start up the engine.

6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.

Feature:

Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. 

EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, 

there might not be a need to make an additional adjustment. 

EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, 

and then EcoOBD2 adjusts itself to match your car perfectly.

What is EcoOBD2 Chip Tuning Box?

EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. 

When it  plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, 

EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car. 

EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. 

EcoOBD2 finds out the hidden power of your car. 

EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. 

EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.

NitroOBD2 Chip Tuning Box

Plug and Drive NitroOBD2 Performance Chip Tuning Box for Benzine Cars

NitroOBD2 finds out the hidden power of your car.

Nitro OBD2 for Benzine: Yellow

Nitro OBD 2 Disel: Red 

Certificates : CE / FCC /  RoHS

- Up to 35% more power

- Up to 25 % more torque

According to your driving habits,  NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.

What is NitroOBD2 Chip Tuning Box?

NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
When it plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU,
NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.

Installation and Calibration

1* Pull the Car Key out from the ignition.

2* Find OBD2 connector(*) in your car and Plug in NitroOBD2 Chip Tuning Box

3* Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4* Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (NitroOBD2 Chip Tuning Box will communicate and establish connection with ECU)

5* Start up the engine.

6* NitroOBD2 Chip Tuning Box will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus NitroOBD2 Chip Tuning Box will adjust itself to match your car perfectly for more fuel saving.

Feature:

Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,
there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,
and then NitroOBD2 adjusts itself to match your car perfectly.

Where located OBD2 connector in your car?

1 Driver's side, underneath dasboard, in the area under the steering
column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.

·Shenzhen Clover Technology Co., Ltd. was established in 2008, over 11 years of experiences in manufacturing and exporting various Auto electronic products, and principally involved in areas of On-Board Diagnostics tools.

·We have a number of independent intellectual property rights, and a number of design patents and utility model patents in product design and production. We are also one of the industry's leading automotive electronics manufacturers specialized in R&D, design, production and sales. Over 2, 000 square meters of whole clean room, more than 6 automatic SMT equipments, with strong production capacity, and through ISO9001: 2008 quality management system certification,providing customers OEM and ODM services according to customer's different requirement.

·We manufacture and export auto products from China to various overseas markets and we also cooperate with satisfied buyers in US, Europe, South Africa, Southeast Asia and the Middle East. We have implemented a comprehensive quality control system. Relying on advanced instruments, perfect quality control system, highly experienced management staff and senior engineering personnel, we are able to satisfy customers' changing demands effectively.

·We adhere to the tenet of "Customer First", with the idea of "Quality, Honesty, and Innovation". Please feel free to contact us for further information.

 ·100% QC inspection Before Shippment, we will provide the photos or video of the whole process of produce, package till sending.

1.Can we get a lower price? Any Discount?
·Yes, price is not a problem, everything could be negotiated based on the quantity.

2.What is your MOQ?

·No MOQ for any sample test.

3.OEM/ODM Service is available?
·Yes, LCB have strong ability to offer customers ODM&OEM products of highest quality,but it will require the MOQ.

4.For Trade Terms, such as payment and leadtime.
·Payment Terms: We mainly support T/T bank transfer,Paypal ,Western Union Or pay online on alibaba.
·Shipping Methods: EMS, DHL, Fedex, TNT, UPS, by sea or your own shipping agent.
·Leadtime: Sample order 4 working days; Bulk order 10-25 working days(after your payment)

5.How about the Warranty?
·There are 12 month warranty.
·While the warranty is not responsible for those broken by violence or updated with other brands.