Nigeria /Indonesia/Malaysai Bigger Project palm oil mill factory

Huatai company mainly engage in oil machinery oil making plant, rice bran oil production line, palm oil production line/palm  kernel,palm fruit oil mill making machine, palm oil processing equipment ,palm oil processing machines,pam oil mill, plam oil processing plant,palm oil expeller machine,palm oil milling machine/equipment,palm oil milling factory/ industry supplier,palm oil mill making machine, palm oil making supplier, palm oil miller factory, palm fractionation,cotton seed protein dephenolization,sunflower seed,rapsseeds,cotton seeds,peanut,soybean oil production line,biodiesel continuous production equipment.    

Reception station:

1.The FFB bunch be transported to plant by truck, after be weighted by weighting bridge, the FFB will be loaded down to FFB Loa

ding Ramp.

2.The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station. 

3.Start on the hydraulic device, iron door be lifted. F

4. FFB will fall down to the Palm Fruit screw conveyor, be transported to pre-treatment plant, to Vertical sterilizer.

Sterilizing process:

1. By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

2.Sterilizing tank: The inside diameter of sterilizing tank is φ2000mm, length 12500mm, welded up by Q235B material

 (Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,P<0.045%,S<0.045%,Cr<0.3%,Ni<0.3%,Cu<0.3%).

3.After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, then saturated steam, 

which pressure is 3bar and temperature is about 130°4. After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing time is 55~60minutes. 

5. The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long , p

alm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.

6. Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, cant open the sterilizing tank door until discharges out all steam and water.

7. Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

Threshing station: 

1.The sterilized FFB will be transport to thresher platform by scraper conveyor.

2.We adopt advanced Drum type thresher, insider diameter is φ1800mm, length is 5000mm.The material of main shaft is #45 steel

 (main chemical composition is C0.42~0.50%, Si0.17~0.37%, Mm0.50~0.30%, P≤0.035%, S≤0.035%, Cr≤0.25%, Ni≤0.25%, Cu≤0.025%).

3.Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.

Kernel pressing and recovery system:

Drawing of FFB processing plant