Nickel base alloy covered welding wire ERNiCrCoMo-1
Class: ERNiCrCoMo-1
AWS: A5.14
Conforms to Certification: AWS A5.14 ASME SFA A5.14
Weld Process: GMAW, ASAW Welding Process
AWS Chemical Composition Requirements | |
C = 0.05 – 0.15 | Cu = 0.50 max |
Mn = 1.0 max | Ni = Remainder |
Fe = 3.0 max | Co = 10.0 – 15.0 |
P = 0.03 max | Al = 0.8 – 1.5 |
S = 0.015 max | Ti = 0.60 max |
Si = 1.0 max | Cr = 20.0 – 24.0 |
Other = 0.50 max | Mo = 8.0 – 10.0 |
Available Sizes | |
Diameter X Spool Sizes | Diameter X Coil Sizes |
.035 x 33# | 1/16 x COIL |
.045 x 33# | 3/32 x COIL |
1/16 x 33# | 1/8 x COIL |
5/32 x COIL |
Application
ERNiCrCoMo-1 is used for welding nickel-chromium-cobalt-molybdenum base material using both the gas tungsten arc and gas metal arc process. Also other cast heat-resisting alloy and dissimilar metals for high temperature service up to 2100º F.
Deposited Chemical Composition % (Typical) | ||
C = 0.06 | P = 0.005 | Ni = Balance |
Mn = 0.20 | S = 0.001 | Cr = 21.8 |
Fe = 0.75 | Al = 1.25 | Mo = 9.05 |
Co = 12.45 |
Deposited All Weld Metal Properties % (AW) | |
Tensile Strength | 112,000psi |
Yield Strength | 88,500psi |
Elongation | 28% |
Deposited Charpy-V-Notch Impact Properties %
Not applicable
Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys | ||||
Process | Diameter of Wire | Voltage (V) | Amperage (A) | Gas |
MIG | .035 inches | 26 – 29 | 150 – 190 | 75 % Argon +25% Helium |
.045 inches | 28 – 32 | 180 – 220 | 75 % Argon +25% Helium | |
1/16 inches | 29 – 33 | 200 – 250 | 75 % Argon +25% Helium | |
SAW | 3/32 inches | 28 – 30 | 270 – 350 | Suitable Flux May Be Used. |
1/8 inches | 29 – 32 | 350 – 450 | Suitable Flux May Be Used. | |
5/32 inches | 30 – 33 | 400 – 550 | Suitable Flux May Be Used. |
Note: Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note: Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.
Physical Constants and Thermal Properties
Density,lb/in3•••••• 0.302
Mg/m3••••••8.36
Melting Range, ºF••••••2430-2510
ºC••••••1330-1380
Specific Heat, Btu/lb•ºF••••••0.100
J/kg•ºC••••••419
Coefficient of Expansion, 78-200F, 106 in/in•ºF••••••6.4
26-100C, µm/m•ºC••••••11.6
Thermal Conductivity, Btu•in/ft2•h•ºF••••••94
W/m•ºC••••••13.6
Electrical Resistivity, ohm•circ mil/ft••••••736
µΩ•m••••••1.22
Specifications and Designation
UNS N06617
ASME SB-166 Boiler Code Section I, VIII
SAE AMS 5887-5889
ASTM B 166
Packaging:
15kgs/spool,1ton/pallet
Shipping:
CIF FOB CNF
Lin’an Dayang Welding Material Co.,Ltd., located in the western part of Hangzhou, was established at the beginning of this century. It is a specialized company, which develops and produces all kinds of welding materials. We concentrite on profession, science and technology innovation, adopt advanced technology and equipment, to implement international quality standard.
Producting Display
Producting Testing