Nickel alloy inconel 713 / 713C round bar price

Inconel 713 C round bar

Inconel 713 C                                                                                                                   

Inconel 713C is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.

Inconel 713C offers outstanding resistance to thermal fatigue and good castability while offering exceptional rupture strength at 1700°F (927°C). 

Inconel 713 C chemical Compositons                                                                          

• Carbon 0.20
• Manganese 1.0 max
• Sulfur 0.015 max
• Silicon 1.0 max
• Chromium 11.0-14.0
• Molybdenum 3.5-5.5
• Titanium 0.25-1.25
• Aluminum 5.5-6.5
• Iron 5.0 max
• Columbium + Ta 1.0-3.0
• Nickel remainder

Inconel 713C Mechinabity Physical                                                                              

•  High-speed tungsten-cobalt or molybdenum-tungsten-vanadium toolsCutting lubricants:
• Chlorinated, sulfurized  fatty mineral oil
• Rich emulsion of 10 parts water and 1 part soluble oil
• Aluminum oxide
• Vitrified bond of medium or soft hardness and medium open structure
• Use 1 pound of sal soda with 25 gallons of water, or chemically active grinding coolant

Inconel 713 C Weledablity                                                                                              

• Inconel 713C can be used in applications using very low restraint
• Use Inco-Weld A electrode
• Flash-butt weld
• Inconel 713C is also good for hydrogen-atmosphere brazing with normal high-heat brazing alloy with electroplated mating surfaces

Inconel 713 C Applications                                                                                             

Inconel 713C is most commonly used for jet engine gas turbine blades.