Model |
Voltage |
Open Flow (GPM/LPM) |
Control Type |
Max Draw |
Shut-off Pressure (PSI/BAR) |
Valves |
Diaphragm |
Ports |
Wire Connections |
NMDP21-G10-40-12 |
12V |
1.0 / 3.8 |
Switch |
4.0A |
40 / 2.8 |
EPDM |
Santoprene |
3/8" Barb |
2-Pin/Leads |
NMDP21-G10-40-24 |
24V |
1.0 / 3.8 |
Switch |
2.0A |
40 / 2.8 |
EPDM |
Santoprene |
3/8" Barb |
2-Pin/Leads |
NMDP21-G11-70-12 |
12V |
1.1 / 4.0 |
Switch |
4.0A |
70 / 4.8 |
EPDM |
Santoprene |
3/8" Barb |
2-Pin/Leads |
NMDP21-G12-35-12 |
12V |
1.2 / 4.3 |
Switch |
4.0A |
35 / 2.4 |
EPDM |
Santoprene |
3/8" Barb |
2-Pin/Leads |
NMDP21-G12-35-24 |
24V |
1.2 / 4.3 |
Switch |
2.0A |
35 / 2.4 |
EPDM |
Santoprene |
3/8" Barb |
2-Pin/Leads |
Custom Service: Bar-cording, Packaging, Label / Logo, Instruction, Color, etc.
Pump Design: |
|
Type: |
Positive Displacement 2 Chamber Diaphragm Pump |
Ports |
3/8" Hose Barb (10 mm) |
Liquid: |
140°F (60°C) |
Dry-Prime: |
4 feet (1.2 m) |
Run Dry: |
Capable for Normal Workloads 5 Minutes |
Electrical: |
|
Motor: |
Permanent Magnet, Intermittent Duty |
Protection: |
Thermal Overload Start on 239 °F(115° C), Automatic Restart |
Voltage: |
12/24 Volts DC |
Leads: |
18 AWG, 14" (35cm) long with 2-Pin connector/Leads |
Fuse: |
6.0 Amps Automotive |
Current: |
4.0 Amps Max |
Control: |
Shut-off Pressure35 PSI: 25 PSI ±5 PSI (±0.3 bar) |
Materials of Construction |
|
Housings: |
Polypropylene/ Nylon |
Valves/Seals: |
EPDM |
Diaphragm: |
Santoprene |
Hardware: |
Stainless Steel Fasteners, Zinc Plated |
Agency Approvals: |
CE |
Note: Do NOT use any Newmao pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F). This pump requires a round cable. Warranty: 1 Year.