Newest!! 2.4Ghz to 0~10V model converter zone setting
Product Picture
Product Feature
1) Isolated power supply
2) Protected from over voltage, short circuit
3) Output 0-10V signal
4) Memory function, each time power-on reserve the mode which stop in the last power-down.
5) 2.4GHz wireless control,Air Self-inspection Sync control
6) Compatible with Freelighting Control system,realized phone WIFI smart control
7) Push dimming function compatible
8) Applicable place:Home, Shop, Hotel, Office and so on household/commercial indoor lighting
9) 3 years warranty.
Technical Parameters
Interface Specifications
Product Compatibility(Applicable for remote)
Typical Application
1) Compatible with a variety of models of remote control at the same time, could be matched according to project situation
2)Air Self-inspection Sync control not only make the product more advantaged than similar product in wireless sync function, but also make 1 remote controller out of limitation of remote control distance, theoretically achieve controlling numerous drivers wireless connection sync control function.
3)4 zones remote typical application, multi drivers could be controlled in each zone. 4 zones could be respectively and allover controlled
4),This wireless driver also could be match with our Wifi Box to achieve phone smart control, Max achieve 100 zones to control separately.
5)0-10V dimmer can adjust output voltage through PUSH port;
Operation: PUSH port connect with V-pin and the output voltage varies from 0 to 10V. When the output is required, make the PUSH port and V-port disconnect, and the output voltage will store the current voltage value.
Tips:
1)If the lamp turned off by remote control, it also can restart the lamp directly by the AC power switch
2)If the dimmer is light up without any operation in 167 hours, the dimmer will turn off automatically and output as 0V. It will recount the time if there is any operation from power switch or remote control.
3)Each dimmer can save unique RF codes(for remote control) and unique wifi code(for wifi control). You can copy the RF code between remotes when more than one remote are needed. Please get the operation instruction from the remotes specification.
4)Memory function, each time power-on reserve the mode which stop in the last power-down.
Product information for placing order
Product name |
Item number |
2.4G to 0-10V |
DLS001 |