New machine for small business wall plastering machine in Russia/Screed tools, specialist plastering tools for rendering

Product Application

DY-1805 plaster machine is my factory production of the lastest generation of the most practical performance of

plastering machine ,changeing the existing exterior wall plaster and mode of operation ,the new design approach so I plant plastering machine implements a man operation,two pole design makes plastering machine connection errors to a minimum,the installation of remote pole inclinometer pole tilt angle can be easily corrected ,so wipe down walls to achieve vertical machine zero error

Main Features

1) Simple structure in linear type ,easy in installation and maintation. 

2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 

3) High pressure double crank to control the die opening and closing. 

4) Running in a high automatization and intellectualization,no pollution 

5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine . 

1.only Dot one pot  on the wall 150mm from the ground.

our machine is the newest product so No

need Dot  points at other place. then put down the guiding rule.

then push the machine in the place

3.Step on the “rear bracket” with left foot, make the machine ahead and stand up to the guiding rule on the bottom. Open the “controller” switch, then the “push-rod electric machine” on the top will make the rod aligned to be “00” automatically. After the number to be “00”,step the “oil pump pedal” tightly on right foot. After 10 seconds,the push-rod electric machine will take back automatically. After that, turn off the“controller”.

4.Lift the compression bar, turn off the

emergency stop switch.