New generation PP hollow building template production line
120/33 high efficiency single screw extruder | |
Material | 38CrMoAIA |
Nitriding depth | 0.5-0.7mm |
Screw hardness | HV≥740 |
Barrel hardness | HV≥940 |
Screw diameter | 120mm |
Length to diameter ratio L/D | 35:1 |
Barrel heating method | ceramic heater |
Screw structure | Suitable for olefin raw materials |
Number of heating zones | 8 zones |
Electric heating power | ≥65kW |
90/33 high efficiency single screw extruder | |
Material | 38CrMoAIA |
Nitriding depth | 0.5-0.7mm |
Screw hardness | HV≥740 |
Barrel hardness | HV≥940 |
Screw diameter | 90mm |
Length to diameter ratio L/D | 33:1 |
Barrel heating method | ceramic heater |
Screw structure | Suitable for olefin raw materials |
Number of heating zones | 5 zones |
Electric heating power | ≥25kW |
Melt pump | |
With 120 host specifications | 150CC |
Mold | |
Mold material | special mold steel |
Product section | according to the drawings |
Cooling table | |
Cooling plate | 2000 mmX950mm |
Electrical control system | |
Computer operation screen | Kunlun open state touch screen |
1.Q:How far is your factory from the train station
A: 50 minutes by car
2.Q: Where is the nearest airport and railway station?
A: Cangzhou xi station, and Beijing international airport
3.Q:How far is the factory from Shanghai?
A:If you take a high-speed train, you will arrive in5 hours
Although the thickness differ by 2mm, the weight is similar , it is different from pvc and playwood formwork,
4.Q:The formwork we used can be shipped back to China for recycling?
A:Chinese customs resist the recycled material back to china.
5. Q:The horizontal structure and vertical structure are different in you formwork , how does it work better?
A:Horizontal use is better. Perpendicular to the extrusion direction
6.Q:How many production lines do you have?
A:We have 7 large production lines with a daily output of 26,000 square meters.