Supply voltage | 10 V DC ... 30 V DC 1) |
Ripple | < 5 Vpp 2) |
Power consumption | 30 mA 3) |
Switching output | PNP 4) |
Output function | Complementary |
Switching mode | Light/dark switching 4) |
Output current Imax. | ≤ 100 mA 5) |
Response time | < 0.5 ms 6) |
Switching frequency | 1,000 Hz 7) |
Connection type | Cable with M12 male connector, 4-pin, 120 mm 8) |
Cable material | PVC |
Conductor cross-section | 0.14 mm² |
Circuit protection | A 9) B 10) C 11) |
Protection class | III |
Weight | 80 g |
Housing material | Plastic, VISTAL® |
Optics material | Plastic, PMMA |
Enclosure rating | IP66 IP67 IP69K |
Test input sender off | Sender off |
Ambient operating temperature | –40 °C ... +60 °C |
Ambient storage temperature | –40 °C ... +75 °C |
UL File No. | NRKH.E181493 |
Part number of individual components | 2055823 WE9-3P3430 2055828 WS9-3D3430 |
MTTFD | 1,063 years |
DCavg | 0% |
ECl@ss 5.0 | 27270901 |
ECl@ss 5.1.4 | 27270901 |
ECl@ss 6.0 | 27270901 |
ECl@ss 6.2 | 27270901 |
ECl@ss 7.0 | 27270901 |
ECl@ss 8.0 | 27270901 |
ECl@ss 8.1 | 27270901 |
ECl@ss 9.0 | 27270901 |
ETIM 5.0 | EC002716 |
ETIM 6.0 | EC002716 |
UNSPSC 16.0901 | 39121528 |
Integrated in the AnyFeeder, a parts bunker with a vibratory conveyor surface provides a continuous supply of small parts. The WSE2S-2 miniature photoelectric sensor or the WSE4-3 and WSE9-3 small photoelectric sensors monitor the level in the parts hopper and transmit an appropriate signal to the control system when the level drops below a certain height. This makes it possible to refill the hopper ahead of time and thus prevents interruptions in the production process.