New advanced charcoal carbonization kiln

New advanced charcoal carbonization kiln

Introduction:                                                                                                                                                   

The whole gas flow type include the outer stove, three set of inner stoves , and the 3ton hoisting tools.  When one inner stove have been finished carbonization, we will use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, we can put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot, it is the ideal choice for mass production of charcoal.

A. final product of our charcoal carbonization kiln: BBQ CHARCOAL

machine-made charcoal is made from sawdust extrusion and then carbonized, having feature of smokeless, tasteless, combustion time long, having high thermal mass, etc.  It's ideal BBQ charcoal and home cooking charcoal.

B. Semi-product before carbonization:  sawdust briquette.

Working principle of charcoal carbonization kiln:                                        

The carbonization furnace adopts the high-temperature dry sliding carbonization technology to make the man-made briquette to charcoal briquette. It is equipped with hyperploid high temperature stream cooling system, and the process of cooling can be accelerated to speed up the period of the production. Moreover, the stove adapts the structure of unique air storage chamber to fully reuse the smoke produced during the process of carbonizing. And 60% of the redundant smoke can be used in drying and carbonizing , saving much fuel during the whole process, and increasing the enterprise revenue.   

Structure of charcoal carbonization kiln:                                                

Outer stove, inner stove, and fume extraction tube                        

Outer stove: it includes heating room, furnace body and heat-keeping layer                               

Inner stove: The raw materials the resistance thermal steel plant and sealing cover.        

Fume extraction tube: When during the process of carbonizing, there will be some smoke (can be burning) the smoke can return to the furnace through tube----gas flow carbonization stove.

Detail machine photos:

Model ZYTH-3

Model ZYTH-4

Characteristics of charcoal carbonization kiln:                                            

1.New type of carbonization equipment, production higher than general furnace, fast speed, high carbon, simple operation

2.With smoke purification device, can store tar, no leakage, long service life;

3.Suitable for wood, logs, mechanism charcoal, nut shell, bamboo, etc, different shaps biomass raw material.

Advantages:                                                                                                          

No polution: there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke. 

Carbonize time more shorter: This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove.

Easy operate: One people can control 2-3set, but need the crane for help; When one inner stove have been finished carbonization, use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot.

Green coclour stove:

Loading&Delivery: