New Product Dental Lab Suction Machine Dust Collector

 Instructions
    Charging: Plug the adapter into the power port (110V~240V), and plug the other output into the charging port. When the adapter is not charging, it will display a green light, when it is charging, it will display a red light, and a green light when it is fully charged. This unit can work while charging.
If the adapter has a green light, turn it on and the adapter will display a red light, which proves that the battery is fully charged (this is different from the green light when it is not connected).
    Power on: The ship-shaped switch on the right side of the fuselage is the main power switch (it is turned on and not off when used).
 . Two working modes can be selected at this time, A induction mode and B manual mode.
The working mode of A induction mode is large, small and no 3 gears. Motor and light work at the same time

In induction mode B, you can switch to manual mode without powering off (Note: when manual mode is turned on, induction mode automatically enters sleep, if you want to restart induction mode, you need to restart the main power supply)

Precautions:

1. Please turn off the switch and cut off the power when the product is not in use.

2. Cut off the power supply to cool down the product before cleaning and maintenance.

3. When cleaning, use a soft cloth dipped in a small amount of water and detergent to gently wipe the surface. It is strictly forbidden to clean with alcohol, gasoline, banana water, xylene and other solvents to avoid yellowing or corrosion of the shell.

Dry the product and dry it. Pack and store in the original packaging. The appliance should be stored in a well-ventilated warehouse below 40°C. There should be no corrosive gas around.