New Polyurethane foam making machine/foam cutting machine/pu foam injection machine
CNMC-500L hydraulic polyurethane/polyurea spray foam machine can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation and etc.
Model | CNMC-500L |
Max working pressure | 35MPa (350 bar) |
Max hose length | 120m(spraying)/150m(injectin |
| g) |
Max fluid temperature | 88℃ (190℉) |
Max output | 24kg/min (42.2 lb/min) |
Max output pressure | 35MPa |
Heater power | 6000W each side |
Heating hose power | 1000W/15m |
Whole power | 18000W |
Voltage | 3-phs 220V |
| 3-phs 380V |
| 3-phs 440V |
Machine weight | 300kg |
1. The machine has a small size, light weight, low failure rate, simple operation, easy to move and so on.
2. Use the most advanced pneumatic booster devices, the maximum degree to ensure stability of equipment work.
3. Multiple raw material filter device to minimize the spray plug problem.
4. Multiple leakage protection system to protect the safety of the operator.
5. With an emergency switch system, to the most rapid response to emergencies.
6. Reliable and powerful heating system can make the raw material rapidly heating to the ideal state, to meet the normal construction of equipment.
7. The feeding volume can be adjusted, and has a regular, quantitative function, especially suitable for high-precision small batch of polyurethane casting to improve production efficiency.
8. The latest no-clean spray gun with small size, light weight, low failure rate.
9. Material taken pump use large ratio method, automatic mention material, high viscosity of winter raw materials can also easily feed.
Welcome to GM, here the high qulality products and professional services will be your best choice !