ROSIMITS wireless vehicle detection system detects the presence and movement of vehicles with magneto-resistive sensors mounted in the pavement.
The sensors continuously transmit traffic data via low power radio communications to access points WAP348x.
Vehicle detection data can be forwarded directly to traffic signal control equipment local to the installation, transmitted to remote systems via a wired or wireless connection to an available IP data network, or both.
Rosim ITS Technology Co., Ltd
wireless vehicle loop detector (WVD) is designed for pursuit of high efficiency and low cost traffic application systems .Based on magnetic detection and wireless sensor networks, WVD sensors acquire the dynamic traffic flow information and send through wireless channel to user systems.
WVD + WAP + Sensormanager + Accessories
The traffic detection system Accessory detail list
Ask for data sheet and catalog
wireless vehicle loop detector embed in the road
Features:
Detection | speed,direction,existance,flow,temperature |
power source | battery supply with 10 years lifespan |
detecting technology | magnetic |
accuracy | above98% |
transmission | mesh network |
calibration | self-adjustment |
Update | OTA |
wireless radio frequency | 233MHz/2.4GHz |
Size | Diameter116mm/Height90mm |
Protection level | IP68 |
ALL of the vehicles data will detected by WVD systems, The sensor manager screen shot as below:
This system can help on Intersection traffic signal control system, highway or urban traffic vehicle counting system and Red light enforcement system
Travel detection systemsystem
a) Install fast. It is only almost 6 minutes that is needed to install one wireless vehicle detector in the road, after installation, the traffic control could be released immediately;
b) Work all-weather. Bad weather for example heavy fog, snow and rain makes no difference;
c) No damage to the road. There’s no need to cut slots on the road surface and place cables or wires as the installation of loops, but only a tiny hole with the size Φ 120/H 100 mm, which makes WVDs become the most suitable vehicle detecting solution on the city high-way and bridges;
d) About 10 years long life span. With high standard water proof and anti-press characteristics, WVD wireless vehicle detector can even be used in the damaged or distorted roads where loops cannot be installed.
e) Cost saving. You just can use the cement which is about $2 for 3-4 sensors.
f) Easy to maintain. Unlike the loops that are easily to be damaged but difficultly to be repaired, WVD wireless vehicle detector supports firmware updating over the air. No need to re-cut the slots, no more materials needed, and all of what you need is to take almost 10 minutes for the devices wireless updating;
g) Low operation consuming. Due to the ultra-low power design and battery supply solution, WVD wireless vehicle detector’s consumed power is very lower than any other detectors like loop detector, video, micro-wave etc. in the market. This appears more and more significantly to our environments;
h) Replace loops seamlessly. The same installation position and compatible output signals makes it easily and simply to replace loops in your system directly.
24Hours on line service, we are there all the time, don't hesitat to ask questions.
Skype: kelly-zhang722
Whats App/Mobile: 0086-15398861264