New High Speed SMT PCB Handle Pick and Place Machine with pneumatic feeder for 0201
rail.
Motion drive system: Panasonic high-speed DSP drive
Operating system: full-automatic chip mounter operating system independently developed by Huawei Guochuang based on Windows operating system, and it supports windows xp, win7 operating system.
Element angle: 0-360°, synchronous rotation during movement
X/Y operation mode: intelligent curve of the linear acceleration and deceleration linkage
MARK point positioning: full-automatic (the MARK point can be adjust at will)
Intelligent alarm: automatic correction, automatic filling, feeding shortage alarm
Plate entering mode: automatic connection from left to right in single sections, automatic PCB transfer positioning. /plunger positioning, manual plate feeding.
Visual display: 17-inch industrial control display, 4:3, resolution: 1280 x1024
Number of recognition cameras: One Mark recognition camera, four quick-recognition cameras and one precise-recognition camera.
Number of recognition cameras: One Mark recognition camera, six quick-recognition cameras and one precise-recognition camera.
Adaptive mounting scope: Adaptive to 0402, 0603, 0805, 1206, diode, audion, SOT, QFP within 40*40mm and the pin distance ≥0.3mm (0.5mm center distance) and BGA.
Product weight 600KG
Dimension: 1420*1370*1350mm
[Technical Parameter]
Number of feeders::68
Number of feeding traies::8
Average power: 700W
Positioning precision: 0.01mm
The buffer range of suction nozzle: 4.5mm
Power supply: 220V, 50/60Hz
Compressed air: 0.5-0.6Mpa
Drive motor: Panasonic servo motor
Recognition mode: simultaneous recognition of six heads
Vacuum source of suction nozzle: high-speed on-off vacuum generator with vacuum breaker
Maximum circuit board area: 500×455mm
Maximum travel scope in Z axis: 20mm
Tape feeder: 8, 12, 16, 24mm and vibration suction (mounting pipe chip)
Maximum mounting speed: 25000 Pcs/h
Average mounting speed of actual mounting resistance: 15000Pcs/h
XYZ drive guide rail: TBI high-precision reloading linear guide
[Technical Parameter]
Number of feeders::68
Number of feeding traies::8
Average power: 700W
Positioning precision: 0.01mm
The buffer range of suction nozzle: 4.5mm
Power supply: 220V, 50/60Hz
Compressed air: 0.5-0.6Mpa
Drive motor: Panasonic servo motor
Recognition mode: simultaneous recognition of six heads
Vacuum source of suction nozzle: high-speed on-off vacuum generator with vacuum breaker
Maximum circuit board area: 500×455mm
Maximum travel scope in Z axis: 20mm
Tape feeder: 8, 12, 16, 24mm and vibration suction (mounting pipe chip)
Maximum mounting speed: 25000 Pcs/h
Average mounting speed of actual mounting resistance: 15000Pcs/h
XYZ drive guide rail: TBI high-precision reloading linear guide