New Decorative Material PVC 3D Wall Panel Board For Wall Decoration

Firmly cooperated with raw material factory for over 20 years,our material guarantees us keeping offering stable quality decorative PVC 3D wall panel worldwide,admitted by our customers on quality control.

All our molds are made of aluminum so our panels are in precise structure with accurate lines and corners.

Cutting the edges with CNC machines makes the edges of our 3d wall panels straight,when each piece fixes together there's scarcely visible gap alongside.

With strict quality control and effective productivity,referring to our experience of production schedule,in condition not interrupting existing production arrangement,for new orders we can finish and send out
300sqm order in 1 day,
1000sqm orders in 3 days,
2000sqm orders in 5 days,
3000sqm orders in 1 week,
Container orders in 2 weeks.

(20GP to load 8000SQM,40GP to load 16500SQM)

As the original factory we'll support on you and promise to be your faithful and trustful supplier,as we ait to supply you with stable quality products on lowest cost,and we offer prefessional export service,if necessary we'll guide you how to buy from China and arrange all kinds of shipment you need and help you fetch the cargo on your side.Prefession creates quality.What makes us trusted by customers is we offer effective after sale service,we believe our products and service will give you an edge over your competitors and support you offering premium products to consumers in the long term.

Wallon - The Original PVC 3D Wall Panel Factory

• Make sure that the surface you are going to install the tiles on is clean, smooth and free of loose paint.

• Plan the layout of the panels on the wall before you start installation. Use a level to ensure straight lines.

• You may use the following to mount your wall tiles…
-Solvent based contact glue (Contact Cement by DAP(red can) or LePage(blue can) - original formula).
-Double-sided foam mounting tape.
-Removable mounting strips.

• If painting, use spray paint or paint spray gun.

• When covering an entire wall with your Wallon 3d wall panels, you will probably need to cut some tiles. The tiles can be cut with a standard utility knife or power tool.

We recommend using blades or bits, designed for finishing work. This will ensure the cleanest cut. When using power tools always follow manufacturer’s suggestions for equipment use and safety precautions.

Tools Required:
• Measuring tape.
• Utility knife (with new blade) or power cutting tool.
• Chalk line.
• Level.

DIMENSIONAL WALL TILES. MODERN, VERSATILE, & RECYCLABLE.

Can I install the PVC 3D wall panel inside the bathroom?
Wallon decorative PVC 3D wall panels can be installed inside the bathroom. In you want to install it inside the shower stall, you have to make sure that the gaps between tiles are properly sealed to prevent water seepage into the back of the tile. Typically the gap can be sealed with the paintable and waterproof caulking or sealant.

How far does the tile protrudes out from the wall?
It really depends on the design you pick. On average, it ranges from 0.25" to 0.75"

How can I fill the tiny gap between the 3d tiles?
You can use paintable wall filler or paintable caulking available at most hardware store. Just make sure the filler you use does not shrink after it dries and that it is paintable if you plan to paint the tile.

How do I cut the PVC 3D wall board?
To cut the decorative PVC 3D wall panels, please use one of the following tools.
1. The easiest way to cut the tile is to use a heavy duty scissor. You can find this in Home Depot or Lowe's. In general, the bigger the opening of the scissor, the easier it is to cut.
2. Ruler and utility knife.
With either one of the above method, please make sure to mark where you want to cut before cutting.

Can I install the 3d panel on the curve wall?
Wallon decorative PVC 3D wall panels is made from plastic material. It is flexible and very durable. You can install it around the curve wall as long as the diameter of the curve is more than 4'.

Can I install this decorative 3D wall panels outdoor?
Yes, Wallon decorative PVC 3D wall panels is made of plastic material and it is water-proof. We have a lot of customers who use the tile to augment the iron gate, outside wall, patio and etc. Just make sure the installation surface is sufficiently smooth and free of grease and dust.

Can I install the 3D wall panel near the stove or other kind of heat source?
No. Wallon decorative PVC 3D wall panels is made of plastic material. It is not designed to be installed around the uninsulated heat source such as stove.

Can I paint the decorative pvc 3d wall panel?
The short answer is Yes. You can definitely paint the decorative PVC 3D wall panels from Wallon. Our tiles come in matte white color. So all you need to do is to paint it with any color you like. You can also primed it first if you like to to give the top coat a more vibrant look. For the top coat, you can use Latex or Oil-based paint. They all work perfectly on our tile.
Alternatively, you can leave the tile as white and use the color lighting to create the color. One excellent choice is the LED strip lighting where you can remotely change the color, lighting pattern and etc.

How do I prepare the wall for installation?
Wallon decorative PVC 3D wall panels comes with very strong glue pre-applied at the back of the tiles to make the installation clean and easy. Before installation, please make sure that the wall is sufficiently smooth, free of dust and debris. The PVC 3D wall panels will install very securely on most of the wall in the typical home.

Call | Whatsup | Wechat : +86.159.1685.7600

Email: info@wallon3d.com