Neutral Flexible Coloured Grout for slate and quarry tiles
Description:
BYTG2 Coloured Grout is a cementitious grout designed for use with most types of ceramic tiles and natural stone joint filling, for both wall and floor, interior and exterior applications.
Where to Use?
A:Can be used for grouting joints that are 1 - 10mm wide.
B:Suitable for use in swimming pools and wet areas
C:For both internal or external, wall and floor grouting applications.
Properties:
A:Non-shrink
B: Mould and mildew resistant
C:Never aging and cracking,
D:No color fading
E: Excellent water repellent
Surface Preparation:
1):Before commencing grouting, ensure the tile adhesive has set firmly. This usually requires 24 hours before grouting work.
2):Remove any spacer lugs, rake-out any excess adhesive and any loose or foreign material from the grout joints.
3):In general, ensure the grout joints are clean and dry.
Mixing;
1): Add BYTG2 Colored Grout to a bucket of clean water mixing constantly with electric mixer until a thick creamy consistency is achieved.
2): The mixing ratio is 25kg of CG2 Tile Grout to approximately 6.5 liters of water.
3): Allow the mixture to stand for 10 minutes, remix, and then use the adhesive.
Shelf Life:
Product can be stored up to 12 months in an elevated, cool dry place in original packaging.
Technical Date:
FORM | Powder |
COLOUR(S) | 16 colors |
POTLIFE | Approx. 40 minutes @ 20°C |
CURING TIME | 24 hours @ 20°C |
OPEN TIME | 15 minutes@ 20°C |
TIME TO TRAFFIC | Full Traffic after 12 hours (depending on site conditions) |
COMPRESSIVE STRENGTH | ≥1.5 MPa under all test conditions |
FOLD STRENGTH | ≥3.5MPa |
CONTRACT AFTER 28 DAYS | ≤2mm/m |
WATER ABSORPTION RATE 30 MIN | ≤2g |
WATER ABSORPTION RATE 240 MIN | ≤5g |
ABRASION RESISTANCE | ≤1000mm3 |
OPEN TIME | Approximately 15 minutes |
Picture:
Business Card: