BN-200 Standard
Microprocessor based servo controlled temperature system
Three modes of control: Pre-warm, manual and automatic
Set temperature and central skin temperature, peripheral temperaqture,
air temperature,APGAR timer,heating power display separately
8” LCD colorful touch screen
Carbon steel heater for more effectivity
Special design Inclined heater head is more convenience for X ray test
Digital skin temperature sensor, the data is accurate and stable
Alloyed bracket, fastness
Alarms functions for safety includes power failure, temperature deviation,temperature probe failure, over temperature
Integral timer to record therapy time
Bigger mattress,
Skin temperature trend for 5min
Electric infant bed tilt angle is ± 12º
Transparent protector folded down,with two infusion seals
Convenient X-ray cassette tray under infant bed
Electric height adjusted suit for operation
With observe light, oxygen supply system and LED phototherapy
Optional Parts: low pressure aspirator ,internal / external
infant resuscitator (T piece) , Air and oxygen blender ,
Gel mattress
1. Power supply: |
AC~ 240V / 50/60Hz |
2. Power input: |
1100VA |
3.An ambient temperature range: |
+18℃ to +30℃ |
4.A relative humidity range: |
30% to 75% |
5.An atmospheric pressure range: |
700 hPa to 1 060 hPa |
6.An ambient air velocity less than |
0.3m/s |
7.Skin temperature control range: |
32℃ to 38℃ |
8.Bed temperature over temperature: |
40℃ |
9.Skin temperature over temperature: |
37.0℃-39℃ |
10.Environment temperature range: |
-40℃ to +55℃ |