Neon Oil Color Fireproof Paint Set for Wood
----------------Product information---------------------
Model: M8600 (Glossy) M8603 (Matt) M8605 (Semi-glossy) M8600D (Primer)
PU Extra Clear Wood Varnish (Lacquer)
1.Description
Maydos Extra Clear Wood Varnish is a high quality 2-component polyurethane finish. It is your best choice for decoration and protection of various wooden surfaces. The high film building character of can also bring out natural wooden beauty to the full.
Neon oil color fireproof paint set for wood or wood paint
2.Advantages
a. Beautiful crystal lacquer film
b. High film building with natural wooden beauty
c. High hardness & good abrasion
d. Excellent leveling & easy to apply
3.Technical Index
ingredient | Polyurethane |
Shelf Life | 12 months (use up in 4 hrs after mixing) |
Gloss | Glossy, Matt, Semi-glossy |
Dilution Ratio (Base: Hardener: Thinner) | Glossy varnish: 1: 1: 0.8-1 |
Theoretical Coverage (mixed complex) | Finish: 12~14m2/kg/coat |
Drying: (25℃, relative humidity: 75%) | Touch Dry: 20 minutes |
Application Method | Brush, Spray |
4.Application Procedure
Note: Details of the dilution ratio may refer to the form
Model | Base | Hardener | Thinner | Mixing Ratio |
M8600 | PU Clear Wood Varnish (Glossy) | MG706 | MX83 | 1: 1: 0.8-1 |
M8605 | PU Clear Wood Varnish (Semi-Gloss) | MG706 | MX83 | 1: 0.5: 1 |
M8603 | PU Clear Wood Varnish (Matt) | MG706 | MX83 | 1: 0.5: 1 |
M8600D | PU Clear Wood Primer | MG706 | MX83 | 1: 0.5: 1 |
5.Our product can avoid these problems
6.There are two kinds of performance
----------------company information------------------
----------------------- please note --------------------------
Storage
Always store in cool & dry places and avoid ignition & heat.
Preparation and Application
1. Make sure all surfaces must be clean, dry and free from wax, grease, oil etc.
2. For bare wood, sand down in the direction of the grain until smooth with fine abrasive
sandpaper. Start with 80# sandpaper, and then150# and last 220#. Use clean cloth to
remove dust between sandings.
3. If you are using paint as a topcoat over another finish, sand the existing finish first with
steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat
has dried, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any
rough spots with steel wool or synthetic steel wool. Wipe with a clean tack cloth to remove
dust. For extra protection, polish the surface with paste wax or furniture polish.
Safety Tips
1. Always apply the paints in a well-ventilated place.
2. Wear eye protection and rubber gloves to prevent exposure to paints.
3. This product is highly flammable liquid. May cause sensitization by inhalation and skin
contact
4. This product is by professional use only
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier