Nd YAG Gain Module DPSS Diode Pump Laser Stack Module
Model no.: JC-D10075CS33
(DPSS laser- High Power Diode Pumped Solid-State Laser) Horizontal stack module is built with high-power laser diode Bars to provide a distributed high-intensity line beam. CW Q-switched DPSS laser is for precision material processing such as thin and thick metals and alloys, sapphire, ceramics and glass etc., the most reliable products in the industrial arena. It offers 75W @ 1064nm for the manufacture of electronics, automotive and horology. Good performance and reliability at an unmatched price.
JCLASER horizontal array module is of active water cooling that enables the low thermal resistance package needed to achieve high output power and high reliability in CW operating mode.
Customized configurations or wavelengths are available upon request.
-Up to 75W CW output for high brightness
-Wavelength 1064 nm
- AuSn hard-solder package, higher stability
- Higher power conversion efficiency
- Macro channel package, sealed house
- Higher reliability, longer life time
Applications
*Material processing
(Metal cutting, thin and thick metals and alloys
Brittle material cutting, glass and ceramics
High-precision cutting and superior edge quality)
*Illumination
*Marking
*Welding
Optical Parameters | Min. | Typical Values | Max. | Unit |
Output Power |
| 75 |
| W |
Wavelength Range |
| 1064 |
| nm |
Crystal Rod Center Height |
| 40 |
| mm |
Dimension of Crystal Rod | Φ3*67 | mm | ||
Doped YAG Crystal | 0.6±0.1atm% |
| ||
Crystal Rod End | plane / antireflection |
| ||
Electrical Parameters |
|
|
|
|
Operating Current |
| 28 | 30 | A |
Threshold Current |
| 6.0 | 7.0 | A |
Operating Voltage |
| 16 | 18 | V |
Water-Cooled Parameters | ||||
Cooling Type | purified water |
| ||
Water Temperature (not condensation) | 22 | 25 | 28 | ℃ |
Water Pressure |
| 0.4 |
| MPa |
Water Flow | 4.0 | 5.0 |
| L/min |
Thermal Parameters |
|
|
|
|
Storage Temperature Range | 0 |
| 55 | ℃ |
Operating Temperature Range | 10 |
| 30 | ℃ |
1.Avoid eyes or skin exposure to direct or scattered radiation in case of laser working
2.Anti-static measures must be taken when transporting, storing and using
3.Use constant current power supply to avoid surge when working
4.Used under rated current and rated power, otherwise reduce lifetime
5.Maintain good thermal dissipation during laser operation
Timely and efficient after-sales technical services and complete supporting, to support online/email/phone/video/webcam.