1. Dynamic heating up
2. Temperature limiting
3. Energy saving
4. Self-regulating(PTC)
5. Compact
These Compact heater for avoiding malfunctions caused by condensation and for use in enclosures where the temperature may not fall below a minimum value. The aluminium radiator pofile has a chinmey effect and helps to distribute heat evenly
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connectors save time and simplify installation.
Operating voltage AC/DC 110-120V, 3x AWG20×300mm sheathed cablel)oom temperature 20?
Operating with voltages below 140V reduces heating performance by approx. 10
Other voltages available Dn request(e.g. AC/DC 48V)
Heaters for tropical conditions on reques
NTL 150 |
||
Operating voltage |
120-260V AC/DC or 12V DC or 24V DC or 48V DC¹(min. 110V, max. 265V) |
|
Heating element |
PTC resistor - temperature limiting |
|
Heater body |
extruded aluminium profile, anodised |
|
Connection |
3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm² |
|
Connection casing |
plastic according to 94 V-0, black |
|
Mounting |
clip for 35mm DIN rail, EN 60715 |
|
Fitting position |
vertical airflow (air outlet up, connection on bottom) |
|
Operating/Storage temperature |
-45 to +70°C (-49 to +158°F) |
|
Operating/Storage humidity |
max. 90% RH (non-condensing) |
|
Protection type/Protection class |
IP20 / I (earthed) |
|
Accessoires
|
screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
|
Note |
other voltages on request |
¹Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.