Semi automatic solar panel laminator
For 1 MW solar panel production line.
New technology, Save electricity and good temperature uniform.
USE : As the equipment of manufacturing solar module limited to laminate glass, EVA (Ethylene Vinyl Acetate Sheet), solar cell and back sheet
Technical parameter:
ITEM |
SPECIFICATION |
Dimension |
2700mm*1600mm*1230mm |
Laminating area |
2200mm x1200mm |
Total power consumption |
36KW ( according to customer's need) |
Air source |
0.6 - 1.0 MPa. |
Operating mode |
Manual / Automatic |
Control system |
PLC |
HIM system |
Touch screen |
Heating mode |
Electrical heating |
Temperature control system |
PID intelligent temperature contol |
Temperature uniformity in working area |
≤ ±3 ℃ |
Temperature control accuracy |
≤± 1 ℃ |
Temperature control range |
30℃ - 180 ℃ |
Vacuum pumping rate |
70 L/s |
Laminating time |
2 - 4 mins ( Excluding solidification time ) |
Heating rate |
135℃ at room temperature with 50 to 60 minutes |
vacuum Time |
90 seconds |
Silicone sheet size |
2500mm * 1400mm,5 mm thickness |
Total weight |
4.2 T |
Quick-wear parts |
Only silicon inflation sheet. Around 3000times / pc |
Warranty period |
12 months. (Exclusive quick-wear parts). |
Product capacity :
Conventional 210 Wp (1650*1030) solar module, 2 pcs in one cycle time.
Production capacity:
210 W * 2pieces / time * 3 times / h * 8 hours * 300 days= 3.02MW / year.
Contacts : |
Charly
|
Tel : |
+8615895885846
|
Phone : |
+86 513 8410 5505
|
WhatsApp/Wechat : |
+8615895885846
|
Skype: |
Reoo solar Charly
|
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
3) What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 2-3 days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
A: Your inquiry related to our products or prices will be replied in 24 hours.
B: Protection of your sales area, ideas of design and all your private information.
C: Best quality and competitive price.