NJP-3 Liquid Hard Capsule Filling Machine & Capsule Filler
Main Introduction:
It was improved on the base of Model NJP400 the automatic capsule filling machine, under the condition of no-change for no-change for the whole construction and raised the output of single machine by Increasing mould holes.
Five times filling for hole plate and height precision for filling.
Computer Program Control is easy to be operated with speedy.
Adopting are face protruding wheel separating degree unit, and run steady with low noise.
It is conformed to the standard of GMP and applicable to the enterprises of middle and small level capsule production.
Technical Parameters:
Mode of machine |
| NJP-3 |
Filling type |
| Liquid, Oil |
Filling pump |
| Peristaltic pump |
Turret speed |
| 40rpm |
Output |
| 7200capsules/h |
Size of capsule style | 00# - 5# | |
No. of segment bores |
| 3 |
Filling nozzle |
| 3 |
Peristaltic pump Qty |
| 3 |
Working station |
| 8 |
Power requirement | 380V/3/ 50Hz or 220v/3/60hz 3.32KW | |
Noise target | <75dBA | |
Overall size | 700*800*1700mm | |
Net weight | 700kg |
Normal brand Main Electric configuration list as following
Description | Specification/Model NO | Brand | Qty |
Indexing box | 83D-6 83D-8 | Shandong China | Each 1pcs |
Main machine | XDW1.1 | Shanghai Chian | 1PCS |
vacuum pump | SZ-0.2
| Shanghai Jianhe | 1PCS |
Dust cleaner | 1.1KW | Zhejiang china | 1PCS |
Touch screen | TK6070Hi | Taiwan, WEINVIEW | 1PCS |
Transducer | VFP015B21A | Delta | 1PCS |
PLC | DVP14E | Delta | 1PCS |
light axis | DKNΦ20-25 | Japan | 1set |
Beeline Bearing | SDE25Y | Japan | 4PCS |
Beeline Bearing | SDE20Y | Japan | 8PCS |
Beeline Bearing | SDE13Y | Japan | 10PCS |
beeline Bearing | SDE12Y | Japan | 8PCS |
beeline Bearing | SDE10Y | Japan | 10pcs |
Roll-pin Bearing | IKDCF18 | Japan | 1PCS |
Hot relay | 3UA59 | China | 3PCS |
Relay | 3TB43 | China | 1PCS |
Relay | 3TB41 | China | 3PCS |
Breaker | 5SJ63-25 | China | 1PCS |
breaker | 5SJ61-6 | China | 1PCS |
Sensor | LJC30A-H-Z/AB2 | Shanghai, China | 1PCS |