NJP 200/400 Fully Automatic Capsule Filling Machine Main Technical Parameter
Model | NJP-200 | NJP-400 |
Productivity | 12000pcs/h | 24000pcs/h |
Size of capsule | Capsule size 00#-5# or Safety capsule size A-E | |
Total Power | 3.7KW | 3.7KW |
Water supply | 500l/h, 0.2-0.1Mpa | 500l/h, 0.2-0.1Mpa |
Dust collector | 160M³/h | 160M³/h |
Overall Size | 720x680x1700mm | 720x680x1700mm |
Weight | 700kgs | 700kgs |
Main Features: 1. It has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly. 2.Single Movement for both upper and lower segments with two-lip seal provide a much better sealing performance. 3.it is controlled by the compture, has a stepless timing with the frequency-convension, the numeral showing makes an easy operation and clear appearance. 4.The Multi-bore dosing brings aa precision dosage(it is controlled around +/-3.5%, the capsule qualified rate is higher than 99%. 5. It has a protector equuipment for the operator and the machine, it has an automatic pause equipment when it is lak for the materials. |
NJP 1000/1200 Fully Automatic Capsule Filling Machine Main Technical Parameter
Model | NJP-1000 | NJP-1200 |
Productivity | 60000pcs/h | 72000pcs/h |
Size of capsule | Capsule size 00#-5# or Safety capsule size A-E | |
Total Power | 5.75KW | 5.75KW |
Water supply | 500l/h, 0.2-0.1Mpa | 500l/h, 0.2-0.1Mpa |
Dust collector | 160M³/h | 160M³/h |
Overall Size | 1020x860x1970mm | 1020x860x1970mm |
Weight | 900kgs | 900kgs |
Main Features: 1. It has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly. 2.Single Movement for both upper and lower segments with two-lip seal provide a much better sealing performance. 3.it is controlled by the compture, has a stepless timing with the frequency-convension, the numeral showing makes an easy operation and clear appearance. 4.The Multi-bore dosing brings aa precision dosage(it is controlled around +/-3.5%, the capsule qualified rate is higher than 99%. 5. It has a protector equuipment for the operator and the machine, it has an automatic pause equipment when it is lak for the materials. |
Machine Advantage
1. Closed turret and dosing station, preventing powder come into the turret. Easy to operate, clean and change over the mould.
2. New turret design, adopt 90 linear bearings from Japan, to guarantee machine precision and use life
3. Adopt bigger cam & dosing disk design, enhance the stability of the machine and extend the use life of the machine
4. Equipped with oil pump for supply lubricate oil to the cam channel, reduce abrasion and extend use life of the parts
5. Automatic capsule switch, controlled by touch screen via PLC
6. Touch screen with used-friendly graphic operator panel.