Bale Clamp Forklift
The Hydraulic Bale clamps enable bale clamp products be handled safely, efficiently, and ecnomicaly without any damage. With different lift capacity, this Hydraulic attachment is ideal for the recycling industry and for bale products applications. Bale clamp prodcuts, such as cotton bales, wool bales, tensitile bales, metal scrap bales and so on to be handled in without work platform condition. Enamel paint finish.
Bale Clamp Forklift Features:
1. Independent Sideshift
2. Cylinder protection to prevent damage
3. Excellent visibility
4. Easy installation
General | 1 | Model | CPC30/CPCD30 | CPC35/CPD35 | ||||||
2 | Power Type | Diesel/GAS | Diesel/GAS | |||||||
3 | Rated capacity | Kg | 3000 | 3500 | ||||||
4 | Load center | mm | 500 | 500 | ||||||
Charactertic | 5 | Lifting height | mm | 3000 | 3000 | |||||
6 | Fork size | mm | 1070*122*40 | 1070*122*40 | ||||||
7 | Mast Tilt Angle | Deg | 6°/12° | 6°/12° | ||||||
8 | Front Overhang(Wheel center to fork face) | mm | 500 | 500 | ||||||
9 | Ground Clearance(Bottom Of Mast) | mm | 126 | 126 | ||||||
10 | Overall Dimension | Overall length(with/without fork) | mm | 3790/2700 | 3790/2700 | |||||
11 | Overall width | mm | 1230 | 1230 | ||||||
12 | Mast lowered height | mm | 2105 | 2105 | ||||||
13 | MastExtended height(with backrest) | mm | 4110 | 4110 | ||||||
14 | Overhead guard height | mm | 2140 | 2140 | ||||||
15 | Turning Radius(outside) | mm | 2415 | 2415 | ||||||
16 | Min. intersecting aisle | mm | 2500 | 2500 | ||||||
Performance | 17 | Speed | Travel(Full/Empty load) | km/h | 18/19 | 18/19 | ||||
18 | Lifting(Full/Empty load) | mm/s | 460/540 | 530/540 | ||||||
19 | Max.Gradeability | % | 20 | 20 | ||||||
Chassis | 20 | Tire | Front | 28x9-15-12PR | 28x9-15-12PR | |||||
21 | Rear | 6.50-10-10PR | 6.50-10-10PR | |||||||
22 | Wheelbase | mm | 1650 | 1650 | ||||||
23 | Self Weight | kg | 4280 | 4500 | ||||||
Transmission | 24 | Battery | Voltage/Capacity | V/Ah | 12/120 | 12/120 | ||||
25 | Engine | Model | C240 | C490BPG | QC495G | |||||
26 | Manufacturer | ISUZU | XinChang | Quanchai | ||||||
27 | Rated output/r.p.m | kW/rpm | 34.3/2500 | 34.3/2500 | 42/2650 | |||||
28 | Rated torque/r.p.m | Nm/rpm | 137.7/1800 | 160/1800-2000 | 174/1980 | |||||
29 | No. of cylinder | 4 | 4 | 4 | ||||||
30 | Bore x Stroke | mm | 86x102 | 90x105 | 95x105 | |||||
31 | Displacement | cc | 2369 | 2670 | 2980 | |||||
32 | Fuel Tank capacity | L | 60 | 60 | 60 | |||||
33 | Transmission | Machanical/Hydraulic | Machanical/Hydraulic | |||||||
34 | Operation Pressure for Attachment | Mpa | 17.5 | 17.5 |