System Function | G code shows | ||||
The smallest programming: | 0.001mm | Locate rapidly: | G00 | ||
The most programming: | ±99999.999mm | Straight line interpolation | G01 | ||
The highest speed: | 60m/min | Arc interpolation: | G02/03 | ||
Feed speed: | 0.01~30m/min | Thread cut: | G32 | ||
Continuous manual: | one axis or two axis at the same time | Cycle of cutting cyliner or cone: | G90 | ||
Line interpolation: | Straight line, arc, screw thread interpolation | Cycle of cutting end face: | G94 | ||
Cutter compensation: | Length of the compansation、nose of tool compensation | cycle of cutting thread | G92 | ||
Cutter compensation input: | Try to cut measuring input mode | Fixed cycle of tapping | G93 | ||
Spindle function: | gear、Double analog control、Rigid tapping | Cycle of rough cut in excircle | G71 | ||
Handwheel function: | panel、handheld | Cycle of rough cut at end face: | G72 | ||
handwheel processing: | The handwheel processing function | Cycle of closed cut | G73 | ||
Screen protection: | The screen protection function | Cycle of drill deep hole at end face | G74 | ||
Tool rest function: | Row tool rest、Electric too post 99 knife | Cycle of cutting groove with external diameter | G75 | ||
Communication function: | RS232、USB interface | Cycle of cutting compound thread | G76 | ||
Compensation function: | Tool compansation、Space compensation、Screw pitch compensation、Radius compensation | Cycle of program | G22,G800 | ||
Edit program: | Metric/Imperial、Straight thread、taper thread and so on | Local coordinate system: | G52 | ||
Preread function: | Preread 10,000 short straight lines | Detect the instruction of skip | G31,G311 | ||
Password protection: | Multilevel password protection | Pole coordinate | G15,G16 | ||
Input/output: | I/O 56*32 | Metrical/Imperial programme: | G20,G21 | ||
PLC programme: | All open PLC design | Set coordinate, offset | G184,G185 | ||
Acceleration and deceleration control: | Straight line、Index | Workpiece coordinate system: | G54~G59 | ||
Number of encoder: | Arbitrary set | Tool radius C | G40,G41,G42 | ||
User macro program: | Have | Accurate locating/continuous path process: | G60/G64 | ||
Electrical gear function: | Have | Constant linear cutting: | G96/G97 | ||
Subpanel: (subplane) | A type with handwheel; B type with band switch; C type with both A and B | Feeding mode: | G98,G99 | ||
Application: | Lathe and turning machine, milling machine, ATC, Planer-type machine, special and heavy machine tools | Backing to start point of program: | G26 | ||
Backing to the fixed point: | G25,G61,G60 | ||||
Backing to the datum point: | G28 | ||||
Suspend: | G04 | ||||
Macro Program: | G65,G66,G67 | ||||
Auxiliary function: | S、M、T |